BLACK FRIDAY SALE - UP TO 60% OFF SIM GEAR
BLACK FRIDAY SALE - UP TO 60% OFF SIM GEAR
Skip to content

Racing Simulator Accessories

Racing simulator accessories are the mounts, stands and hardware that turn a bare cockpit into a finished rig. Gamer Gear Direct stocks them across Australia, from wheel and pedal mounts to monitor stands, floor mats and the small spare parts that keep a build going.

Read More

Mounts for Wheels, Pedals and Shifters

A mount is what stops your gear moving under load. Wheelbase mounts, pedal plates, shifter brackets and handbrake side mounts bolt to the frame at a set position, and the right one depends on the cockpit you own and the base you are fixing to it.

Most are cut for a specific bolt pattern or profile size, so check the fitment note on the product before you order. Complete frames are in Racing Simulator Cockpits, and the pedals themselves are in Sim Racing Pedals.

Aluminium wheelbase mount bracket bolted to a sim racing cockpit frame

Monitor Stands and Screen Support

Screen position changes how a rig feels more than most upgrades do. Cockpit-mounted stands fix the screen to the frame so it moves with the rig, while freestanding stands sit behind it and suit a setup that gets moved, shared or packed away.

Single, dual, triple and quad configurations are available, along with the VESA arms, extrusion and brackets to build one up. The full range sits in Monitor Stands.

Freestanding quad monitor stand holding four screens behind a racing rig

Floor Mats and Rig Protection

A floor mat protects timber and tile from the weight of a loaded rig and stops the frame creeping under heavy braking. Options run from neoprene through to diamond plate, and some carry edge lighting.

Levelling feet, caster wheels and extrusion end caps finish a build off, and make a heavy rig easier to square up on an uneven floor or roll out of the way.

Sim rig floor mat with RGB edge lighting under a racing cockpit

Trays, Shelves and Cockpit Extras

Keyboard and mouse trays, PC and control box shelves, tablet and button box holders, headphone hooks and a cup holder all fix to the same extrusion as the rest of the rig.

These are the parts people add last and miss most. A tray that swings clear when you race, or a holder that keeps a drink off the floor, changes how usable a rig is day to day.

Cup holder clamped to the aluminium profile of a sim racing rig

Spare Parts and Hardware

Bolts, ball-bearing nuts, washers, spacers and end caps are stocked as individual parts, so a build or a repair does not stall waiting on a single fastener.

Quick release adapters and wheel-side kits are grouped in Quick Releases. Mounts and panels for flight setups are in Flight Simulator Accessories.

Racing Simulator Accessory FAQs

Will a mount fit my cockpit?

Check the product page for the frame and bolt pattern it is cut for. Most mounts are made for a specific profile size or wheelbase pattern, and an adapter plate covers some of the gaps. If you are unsure, call us with your cockpit model and we will check it.

What size monitor stand do I need?

Work from the screen weight and VESA pattern rather than the diagonal alone. A cockpit-mounted stand keeps the screen fixed to the rig, and a freestanding stand is the better choice if the rig moves or the screen is very large.

Do I need a floor mat?

On carpet, mostly for grip and to stop the frame walking. On timber or tile it is about protecting the surface from the weight and from bolt heads. A heavier mat also takes some of the noise out of a rig under load.

Can I mix brands on one rig?

Often yes, through a universal mount or an adapter plate, since most aluminium profile cockpits share common extrusion sizes. Tube chassis rigs are less interchangeable, so check the fitment note before ordering.

What should I buy first?

Whatever stops something moving. A solid wheelbase or pedal mount changes how a rig feels far more than any extra will, and it is the part that limits how hard you can push everything else.

Buying Racing Simulator Accessories from Gamer Gear Direct

Everything here is sourced through official channels and covered by its manufacturer warranty, with support handled locally rather than through an overseas returns process. Most stock is held and dispatched from our Adelaide warehouse, with some lines shipped direct by our brand partners.

If you are not certain a mount suits your frame, call us on (03) 9961 0240, Monday to Friday, 9am to 5pm, and we will check it with you before you order. You are also welcome to see the gear set up in person at our Dandenong South showroom in Melbourne.

  • Trak Racer M8x25 Hex Screws (Set of 6), main product image Save 15%
    Trak Racer

    Trak Racer M8x25 Hex Screws (Set of 6)

    Original Price $15.00
    Current Price $12.75
    Only 8 left!

    Five more millimetres of reach The standard M8 fixing on an aluminium rig is 20mm long, and it works until you put something thicker in the join...

    View full details
    Original Price $15.00
    Current Price $12.75
    Save 15%
    Only 8 left!
  • Trak Racer Tablet & Button Box Holder, additional product view
    Trak Racer Tablet & Button Box Holder, main product image
    Save 15%
    Trak Racer

    Trak Racer Tablet & Button Box Holder

    Original Price $129.00
    Current Price $109.65
    33 in stock

    Arms included, sizes published A complete tablet and button box holder for aluminium profile rigs, and the version that arrives with its own arm...

    View full details
    Original Price $129.00
    Current Price $109.65
    Save 15%
    33 in stock
  • Trak Racer M8x20mm Hex Screws (Set of 20), main product image
    Save 15%
    Trak Racer

    Trak Racer M8x20mm Hex Screws (Set of 20)

    Original Price $10.00
    Current Price $8.50
    Only 1 left!

    The default fastener, in bulk If you had to pick one screw that holds a Trak Racer aluminium rig together, this is it. M8 x 20mm, hex head, and ...

    View full details
    Original Price $10.00
    Current Price $8.50
    Save 15%
    Only 1 left!
  • Trak Racer M6x20 Hex Screws (Set of 6), main product image
    Save 15%
    Trak Racer

    Trak Racer M6x20 Hex Screws (Set of 6)

    Original Price $15.00
    Current Price $12.75
    13 in stock

    The smaller thread in the system Not everything on an aluminium rig is M8. Lighter brackets, trim parts and some accessory mounts use M6, and re...

    View full details
    Original Price $15.00
    Current Price $12.75
    Save 15%
    13 in stock
  • Trak Racer M8 Lock Washers (Set of 10), a single unit
    Trak Racer M8 Lock Washers (Set of 10), the set together
    Save 15%
    Trak Racer

    Trak Racer M8 Lock Washers (Set of 10)

    Original Price $49.00
    Current Price $41.65
    Only 2 left!

    Stop the bolts backing out Force feedback is vibration, and vibration undoes fasteners. A direct drive wheelbase running at high torque puts a c...

    View full details
    Original Price $49.00
    Current Price $41.65
    Save 15%
    Only 2 left!
  • Trak Racer M8 Flange Nuts (Set of 4), main product image
    Save 15%
    Trak Racer

    Trak Racer M8 Flange Nuts (Set of 4)

    Original Price $20.00
    Current Price $17.00
    19 in stock

    One part instead of two A flange nut has a washer built into it. The base flares out into a wide bearing surface, so it spreads the clamping loa...

    View full details
    Original Price $20.00
    Current Price $17.00
    Save 15%
    19 in stock
  • Trak Racer Flat M8 Washers (Set of 20), main product image
    Sold out
    Trak Racer

    Trak Racer Flat M8 Washers (Set of 20)

    Original Price $10.00
    Current Price $8.50
    Out of stock

    The part that protects the finish A bolt head bearing directly on anodised aluminium does two bad things. It concentrates the clamping force int...

    View full details
    Original Price $10.00
    Current Price $8.50
    Sold out
    Out of stock
  • Trak Racer ButtKicker Mount Upgrade Kit, additional product view
    Trak Racer ButtKicker Mount Upgrade Kit, main product image
    Save 15%
    Trak Racer

    Trak Racer ButtKicker Mount Upgrade Kit

    Original Price $59.00
    Current Price $50.15
    49 in stock

    A mount only, and it is worth saying so plainly This is a bracket. It is a solid stem and mount with screws, finished in matte black, and it exi...

    View full details
    Original Price $59.00
    Current Price $50.15
    Save 15%
    49 in stock
  • Trak Racer Handbrake Mount for TRX, additional product view
    Trak Racer Handbrake Mount for TRX, main product image
    Save 15%
    Trak Racer

    Trak Racer Handbrake Mount for TRX

    Original Price $59.00
    Current Price $50.15
    73 in stock

    One bracket, either side A handbrake bracket designed around the Alpine Racing TRX, and unlike the handed TR8 Pro mounts this one fits either si...

    View full details
    Original Price $59.00
    Current Price $50.15
    Save 15%
    73 in stock
  • Trak Racer 5mm Spacer Kit (Set of 4), main product image
    Save 15%
    Trak Racer

    Trak Racer 5mm Spacer Kit (Set of 4)

    Original Price $20.00
    Current Price $17.00
    Only 8 left!

    Five millimetres of clearance Some wheelbases will not sit flat on a mounting plate because something on the underside gets in the way. A power ...

    View full details
    Original Price $20.00
    Current Price $17.00
    Save 15%
    Only 8 left!
  • Trak Racer 2m Red Rubber Dust Strip, additional product view
    Trak Racer 2m Red Rubber Dust Strip, main product image
    Save 15%
    Trak Racer

    Trak Racer 2m Red Rubber Dust Strip

    Original Price $19.00
    Current Price $16.15
    36 in stock

    Red trim for a black frame Red against black anodised aluminium is the most legible accent combination there is, which is why it turns up on so ...

    View full details
    Original Price $19.00
    Current Price $16.15
    Save 15%
    36 in stock