Cut aluminium extrusion leaves an open profile at every end, and an open profile collects dust, catches clothing and looks unfinished on an otherwise tidy build. These moulded ABS caps push into the end of 80x40mm profile and close it off.
The 80x40mm size is the workhorse section across the aluminium chassis rigs Trak Racer builds, so this is the cap most rigs need. They ship two to a pack, which covers both ends of a single rail.
An exposed extrusion end is a dust trap. The internal channels run the length of the rail and collect whatever settles in the room, which then works its way out onto the floor every time the rig is moved. A cap closes the section and keeps the inside clean.
There is a safety element too. Cut aluminium ends can be sharp, particularly on a rail at shin height, and a moulded cap takes the edge off. Pair them with the 40mm corner bracket and cap set if you want the corners finished to the same standard. Where the frame steps up to the deeper sections, the 120x40mm cap covers those.
"Caps are the cheapest thing you can do to make a self built rig look like a finished product. People spend thousands on a cockpit and then leave four open beam ends staring at them. A pack or two of these is the last five minutes of any build."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
These fit 80x40mm extrusion. Measure the end of the rail you want to cap, since Trak Racer aluminium rigs also use 120x40mm and 160x40mm sections in different places on the same frame.
Two, which finishes both ends of a single rail. Count the open ends on your rig before ordering.
No. They are a push fit into the end of the profile and can be pulled out again if you need to cut or reposition a rail later.
Profile size: 80 x 40mm
Material: ABS
Pack quantity: 2
Slot size: 8mm
Installation: Push fit
Warranty: 2 years
2 x 80x40mm ABS extrusion end caps
This Trak Racer extrusion end cap set is backed by a 2-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
Cut aluminium extrusion leaves an open profile at every end, and an open profile collects dust, catches clothing and looks unfinished on an otherwise tidy build. These moulded ABS caps push into the end of 80x40mm profile and close it off.
The 80x40mm size is the workhorse section across the aluminium chassis rigs Trak Racer builds, so this is the cap most rigs need. They ship two to a pack, which covers both ends of a single rail.
An exposed extrusion end is a dust trap. The internal channels run the length of the rail and collect whatever settles in the room, which then works its way out onto the floor every time the rig is moved. A cap closes the section and keeps the inside clean.
There is a safety element too. Cut aluminium ends can be sharp, particularly on a rail at shin height, and a moulded cap takes the edge off. Pair them with the 40mm corner bracket and cap set if you want the corners finished to the same standard. Where the frame steps up to the deeper sections, the 120x40mm cap covers those.
"Caps are the cheapest thing you can do to make a self built rig look like a finished product. People spend thousands on a cockpit and then leave four open beam ends staring at them. A pack or two of these is the last five minutes of any build."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
These fit 80x40mm extrusion. Measure the end of the rail you want to cap, since Trak Racer aluminium rigs also use 120x40mm and 160x40mm sections in different places on the same frame.
Two, which finishes both ends of a single rail. Count the open ends on your rig before ordering.
No. They are a push fit into the end of the profile and can be pulled out again if you need to cut or reposition a rail later.
Profile size: 80 x 40mm
Material: ABS
Pack quantity: 2
Slot size: 8mm
Installation: Push fit
Warranty: 2 years
2 x 80x40mm ABS extrusion end caps
This Trak Racer extrusion end cap set is backed by a 2-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
