The 120x40mm sections on an aluminium rig are the ones people notice, because they are the deep beams that carry the wheel deck and the seat rails. Leaving their ends open undoes a lot of the visual work the rest of the frame is doing.
These caps are moulded to the 120x40mm profile and press into the open end. Two come in a pack, and they sit flush rather than proud, so a capped rail reads as a solid beam rather than a piece of cut stock.
A 120x40mm beam has a larger internal void than the 80x40mm sections around it, which means a generic cap will not hold. These are moulded to the specific profile so they grip the internal walls and stay put when the rig is moved.
If your frame mixes section sizes, and most aluminium rigs do, check each open end before ordering. The 160x40mm cap covers the deepest sections, and the hardware mounts range carries the brackets and fixings that go with them. Most frames also carry 80x40mm rails, and the 80x40mm cap finishes those.
"The 120x40 beams are the ones at eye level when you walk past the rig, so these are the caps that make the most visual difference. It is a small thing, but a frame with every end capped looks like it was built by someone who cared."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
They are moulded for Trak Racer 120x40mm extrusion with an 8mm slot. Profile from other manufacturers can differ in its internal dimensions even at the same nominal size, so check before ordering.
Two caps, enough to finish both ends of one 120x40mm rail.
Yes. They press in and pull out, so a rail can be cut down or repositioned without losing the caps.
Profile size: 120 x 40mm
Material: ABS
Pack quantity: 2
Slot size: 8mm
Installation: Push fit
Warranty: 2 years
2 x 120x40mm ABS extrusion end caps
This Trak Racer extrusion end cap set is backed by a 2-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
The 120x40mm sections on an aluminium rig are the ones people notice, because they are the deep beams that carry the wheel deck and the seat rails. Leaving their ends open undoes a lot of the visual work the rest of the frame is doing.
These caps are moulded to the 120x40mm profile and press into the open end. Two come in a pack, and they sit flush rather than proud, so a capped rail reads as a solid beam rather than a piece of cut stock.
A 120x40mm beam has a larger internal void than the 80x40mm sections around it, which means a generic cap will not hold. These are moulded to the specific profile so they grip the internal walls and stay put when the rig is moved.
If your frame mixes section sizes, and most aluminium rigs do, check each open end before ordering. The 160x40mm cap covers the deepest sections, and the hardware mounts range carries the brackets and fixings that go with them. Most frames also carry 80x40mm rails, and the 80x40mm cap finishes those.
"The 120x40 beams are the ones at eye level when you walk past the rig, so these are the caps that make the most visual difference. It is a small thing, but a frame with every end capped looks like it was built by someone who cared."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
They are moulded for Trak Racer 120x40mm extrusion with an 8mm slot. Profile from other manufacturers can differ in its internal dimensions even at the same nominal size, so check before ordering.
Two caps, enough to finish both ends of one 120x40mm rail.
Yes. They press in and pull out, so a rail can be cut down or repositioned without losing the caps.
Profile size: 120 x 40mm
Material: ABS
Pack quantity: 2
Slot size: 8mm
Installation: Push fit
Warranty: 2 years
2 x 120x40mm ABS extrusion end caps
This Trak Racer extrusion end cap set is backed by a 2-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
