A 10mm laser cut carbon steel deck with full slide and angle adjustment, spanning a 580mm mount width. It is the general purpose wheel surface for aluminium profile cockpits, taking almost any wheelbase that bolts down from above.
It suits the TR200, TRA, TR160, TR120, TR80S, TR40S and TRK frames in the Trak Racer range, and extrusion rigs from other manufacturers built on the same principle. It is not for the TRX tube frame cockpits.
Reach and rake are the two adjustments that matter most once the seat is set, and this deck gives you both. Slide brings the wheel toward you or pushes it away. Angle tilts the mounting face so the rim presents toward the driver rather than straight up.
Being able to change one without disturbing the other is the practical benefit. On a rig shared between drivers, that turns a rebuild into a two minute adjustment.
Most wheelbases bolt straight down onto the deck. The exceptions are the high torque group: Simucube, VNM, VRS, Immsource, Leo Bodnar, Sim-Lab and SimXperience bases generally want a compatible motor mount between the base and the deck.
The universal direct drive motor mount covers that group in one part and adds twelve degrees of tilt on top of the deck's own adjustment.
Ten millimetres of laser cut carbon steel is a lot of material for a wheel deck, and the reason is torque. A deck that flexes turns crisp force feedback into something vague, and the flex is worst exactly when the information matters most, under load in a corner.
It also means the deck is heavy, which is fine on a permanent rig and worth knowing if you move your cockpit often. The rest of our hardware mounts range covers the fixings and brackets that go with it. If your cockpit is a tube framed TRX rather than an extrusion rig, the TRX wheel mount plate is the equivalent part.
"A thick deck is one of those things you cannot feel directly but notice the absence of. If you have ever mounted a strong base on a thin plate and wondered why the feedback felt smeared, this is the fix. On an extrusion rig it is the most flexible wheel surface Trak Racer makes."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The aluminium profile range: TR200, TRA, TR160, TR120, TR80S, TR40S and TRK, plus extrusion rigs from other manufacturers. It is not for the TRX tube frame cockpits.
Most do. Simucube, VNM, VRS, Immsource, Leo Bodnar, Sim-Lab and SimXperience bases generally need a compatible motor mount between the base and the deck.
10mm laser cut carbon steel, which is what allows it to carry a high torque base without flexing.
Full slide adjustment for reach and angle adjustment for rake, and the two can be set independently.
Type: Universal wheelbase plate deck
Material: 10mm laser cut carbon steel
Mount width: 580mm
Adjustment: Full slide and angle
Cockpit fit: TR200, TRA, TR160, TR120, TR80S, TR40S, TRK and other extrusion rigs
Warranty: 5 years
1 x Universal wheelbase plate deck
Mounting hardware
This Trak Racer wheelbase plate deck is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
A 10mm laser cut carbon steel deck with full slide and angle adjustment, spanning a 580mm mount width. It is the general purpose wheel surface for aluminium profile cockpits, taking almost any wheelbase that bolts down from above.
It suits the TR200, TRA, TR160, TR120, TR80S, TR40S and TRK frames in the Trak Racer range, and extrusion rigs from other manufacturers built on the same principle. It is not for the TRX tube frame cockpits.
Reach and rake are the two adjustments that matter most once the seat is set, and this deck gives you both. Slide brings the wheel toward you or pushes it away. Angle tilts the mounting face so the rim presents toward the driver rather than straight up.
Being able to change one without disturbing the other is the practical benefit. On a rig shared between drivers, that turns a rebuild into a two minute adjustment.
Most wheelbases bolt straight down onto the deck. The exceptions are the high torque group: Simucube, VNM, VRS, Immsource, Leo Bodnar, Sim-Lab and SimXperience bases generally want a compatible motor mount between the base and the deck.
The universal direct drive motor mount covers that group in one part and adds twelve degrees of tilt on top of the deck's own adjustment.
Ten millimetres of laser cut carbon steel is a lot of material for a wheel deck, and the reason is torque. A deck that flexes turns crisp force feedback into something vague, and the flex is worst exactly when the information matters most, under load in a corner.
It also means the deck is heavy, which is fine on a permanent rig and worth knowing if you move your cockpit often. The rest of our hardware mounts range covers the fixings and brackets that go with it. If your cockpit is a tube framed TRX rather than an extrusion rig, the TRX wheel mount plate is the equivalent part.
"A thick deck is one of those things you cannot feel directly but notice the absence of. If you have ever mounted a strong base on a thin plate and wondered why the feedback felt smeared, this is the fix. On an extrusion rig it is the most flexible wheel surface Trak Racer makes."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The aluminium profile range: TR200, TRA, TR160, TR120, TR80S, TR40S and TRK, plus extrusion rigs from other manufacturers. It is not for the TRX tube frame cockpits.
Most do. Simucube, VNM, VRS, Immsource, Leo Bodnar, Sim-Lab and SimXperience bases generally need a compatible motor mount between the base and the deck.
10mm laser cut carbon steel, which is what allows it to carry a high torque base without flexing.
Full slide adjustment for reach and angle adjustment for rake, and the two can be set independently.
Type: Universal wheelbase plate deck
Material: 10mm laser cut carbon steel
Mount width: 580mm
Adjustment: Full slide and angle
Cockpit fit: TR200, TRA, TR160, TR120, TR80S, TR40S, TRK and other extrusion rigs
Warranty: 5 years
1 x Universal wheelbase plate deck
Mounting hardware
This Trak Racer wheelbase plate deck is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
