- Description
- Specifications
- What's In The Box?
- Warranty
- Shipping
- 100 Day FREE Returns
- Why Buy From Us?
Trak Racer TR40S Flight Simulator Cockpit
Flight simulation asks different things of a cockpit than racing does. You sit more upright, you sit for longer, and your hands work at your sides rather than in front of you. A racing bucket bolted to a racing frame gets you most of the way there and then fights you on all three.
The TR40S Flight is Trak Racer's answer: the 40 x 40mm aluminium extrusion frame, supplied as a complete flight bundle with the reclining Trak Racer Flight Seat, a four-way adjustable pedal mount ready for rudder pedals, and left and right side mounts for your stick and throttle.
It sits with the rest of the flight simulator cockpits we stock, and the frame underneath is the same one that carries the TR40S Racing Simulator.
Key features
- Complete flight bundle with the reclining Trak Racer Flight Seat
- HOTAS cut-outs and lumbar support in the seat
- Four-way fully adjustable pedal mount, pre-drilled for rudder pedals
- Left and right side mounts for stick and throttle
- 40 x 40mm aluminium T-slot extruded profile
- Lightest and least expensive flight bundle in the range
- Seat slider rails available as an option
- Motion capable, D-BOX Gen 5 actuators mount to the frame with Trak Racer's bracket kit
A seat built for sitting still
A racing bucket exists to stop your body moving sideways. Flight has no sideways. What it has is two hours in one position, and a deeply bolstered shell makes that worse rather than better.
The Flight Seat reclines and it is shaped to leave your shoulders free. On the smallest frame in the range that matters more, not less, because this is the cockpit most likely to be used in a room where you cannot simply get up and walk around.
Rudders first, then everything else
Rudder pedals are the control most people get wrong, because they need to sit further forward than racing pedals and they need to stay put. They bolt straight to the pedal baseplate and adjust on the slider for reach and angle. Trak Racer name the Logitech Flight Rudder Pedals and Heavy Equipment set, the Thrustmaster T.Flight Rudder Pedals and TPR Pendular Rudder Pedals, and the Virpil Ace.
Left and right side mounts come with the cockpit for the stick and throttle, covering Thrustmaster across the HOTAS Warthog and Warthog dual throttles, the T.Flight HOTAS One and 4, the T.16000M and FCS, the TCA Quadrant, Officer and Sidestick Airbus editions and the TWCS throttle; Logitech and Saitek including the X52, X52 Professional and X56, the Throttle Quadrant and the Extreme 3D Pro; Honeycomb Bravo; Virpil VPC MongoosT-50; VKB Gunfighter III; VirtualFly TQ3 and TQ6 Plus; and Hori.
For yokes, Trak Racer name the Honeycomb Aeronautical Alpha Flight Controls and the Logitech Flight Yoke System, both by clamp, plus the Logitech Flight Switch, Multi and Instrument panels, Logitech Heavy Equipment and the Turtle Beach VelocityOne Flight, with the Alpha and the Logitech yoke fitting by clamp. A centre flight stick mount is available separately if you fly something that wants the stick between your knees rather than at your side.
The lightest way into a flight cockpit
The TR40S is the smallest and lightest frame Trak Racer build, which makes this the least expensive complete flight bundle they offer. For a first proper cockpit that is a genuine advantage, particularly in a room the rig has to share.
The frame is 40 x 40mm aluminium extrusion. If you also intend to race on it, note the wheelbase rating is 0 to 10Nm, which suits belt-driven and entry direct drive wheels rather than strong ones.
For flight alone that rating matters far less, because a yoke or a stick puts nothing like the load through a frame that a direct drive wheelbase does. This is the frame to choose if flying is the point and racing is occasional.
Screens and motion
The monitor stand is optional, with integrated single through to quad configurations available, and freestanding stands as an alternative for larger arrays.
The TR40S Flight is motion capable. Trak Racer list the TR40S among the frames their D-BOX Gen 5 actuator brackets fit, and those brackets bolt straight to the aluminium extrusion, so the actuators go on the rig itself. A separate motion platform is only needed for the tube-chassis rigs, the TRX and the TR8 Pro.
If you later add a motion base, talk to us first. Motion changes what you want from monitor mounting, because screens fixed to a moving platform move with it. The stands are in the sim racing monitor stands.
Our expert take
"Buying the bundle beats assembling it yourself here, and by a wider margin than on the bigger frames. On an entry cockpit the seat is the largest single cost, and getting the right one included changes the maths completely."
"For someone who flies and only dabbles in racing, the TR40S Flight is the smart buy. The 10Nm ceiling that rules it out as a serious racing rig is close to irrelevant to a yoke and a set of rudder pedals."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
Frequently asked questions
What makes this different to the racing version?
The frame is identical. What you pay for is the bundle: the reclining Flight Seat, a pedal mount set up for rudders, and left and right control side mounts. The TR40S Racing Simulator ships without a seat.
Which rudder pedals fit?
Trak Racer name five sets including the Logitech and Thrustmaster rudder pedals and the Virpil Ace. The full list is in the body of this page, and we can confirm any model you are unsure about.
Which yokes fit?
The Honeycomb Alpha and Logitech Flight Yoke System both fit by clamp, and the Turtle Beach VelocityOne mounts to the Trak Racer yoke mount.
Can I race on it too?
Yes, though the wheelbase rating is 0 to 10Nm, which suits belt-driven and entry-level direct drive wheels. If racing is the main event, look at a frame further up the range.
Is a monitor included?
No. Monitors, stands, rudder pedals, yokes and HOTAS gear are all separate. Start with the sim racing monitor stands.
Type: Flight simulator cockpit, complete bundle
SKU: TR40S-FLTS-AU
Chassis: 40 x 40mm aluminium T-slot extruded profile
Seat: Reclining Trak Racer Flight Seat with HOTAS cut-outs and lumbar support
Pedal mount: Four-way fully adjustable, pre-drilled for rudder pedals
Flight control mounting: Left and right side mounts included
Centre stick mount: Optional
Wheelbase torque rating: 0 to 10Nm
Seat slider rails: Optional
Monitor mount: Optional, integrated single through to quad
Motion: Motion capable, D-BOX Gen 5 actuators mount to the frame with Trak Racer's bracket kit
Rudder pedals, yoke, HOTAS, monitor and stand: Not included
Warranty: 5 years
1x TR40S aluminium extrusion chassis
1x Wheel or yoke mount
Pedal support plates
1x Reclining Trak Racer Flight Seat
1x Four-way fully adjustable pedal mount
Left and right flight control side mounts
Floor-protecting rubber feet
Cable clips
Coloured profile strips
All mounting screws, brackets and fixtures
Assembly tool kit
This Trak Racer flight simulator cockpit is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
- VIC: 2–4 business days
- NSW: 2–4 business days
- ACT: 3–5 business days
- QLD: 2–4 business days
- SA: 2–4 business days
- WA: 4–10 business days
- NT: 4–10 business days
- TAS: 4–10 business days
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
- Expert guidance on choosing the right gear for your goals and budget
- Personalised setup advice tailored to your space and the way you play
- Smart gear pairing suggestions for PCs, consoles, monitors, wheels, controllers and accessories
- A dedicated account representative for ongoing support
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
Honestly great aluminum frame with lots of adjustability. Just what I needed
The rig is amazing and is great for any brand wheelbases and pedals, but be careful when putting it together, as you can cut yourself badly on the aluminum. I learned the hard way. Just be careful and take your time and this rig is amazing.
Really nice and suprisingly rigid.only down side is the bending at the middle of rig.but i think that could be fixed with additional 4080 50cm long extra part to the top of lower 4040 profile.im very happy with the product.
There was a delay with the delivery which scared me a bit after reading through the reviews of other situations. Got in contact via email and got updates of reasoning of delay. Took about 3 weeks to get it which was not bad, all things considered. In terms of the rig, very good quality and sturdy. Took me some time to figure out the instructions to set it up, but overall it went OK. Happy with the purchase and already got other parts from them without any delay. Only wish to get more communication when spending this kind of money, asie from that , all good 👍
I am very impressed with the TR40S. It's solid, versatile, highly adjustable, easy to work with and I love that it came with extra hardware (nuts, bolts, t-slot nut thingies, etc...). The instructions were easy to follow (my only suggestion would be to include the part number on the hardware packaging that matches what is on the instructions... not a biggie though, you can match by using the size notation that IS included on the packaging). I managed to mount a BMW E90 seat that I found on fb marketplace, without any additional adapters. My only disappointment is with the caster wheels I got with it... because they extend beyond the side of the extrusions, it creates a lot of leverage that ends up twisting the extrusion, and everything sags and is not solid. I ordered 4 more in the hopes that 8 wheels will be better, maybe putting them on alternate sides of the extrusion will balance things out. This does not detract from the quality of the cockpit itself though, with which I am very happy.