Three actuators is the layout a lot of experienced drivers land on. Two at the front doing the work you feel through the wheel and the pedals, one in the centre at the rear carrying the pitch. It is a genuine step up from two without the cost of four.
This is the TR Move platform supplied with the centre motor bracket that layout needs, plus the four corner brackets and the pivot, so the same base also covers two and four actuator setups if you change your mind. D-BOX Gen 5 actuators are a separate purchase.
A corner bracket holds an actuator at the edge of the platform. The centre rear motor bracket holds one in the middle of the rear rail instead, on the centreline of the rig. That single part is what turns a four corner platform into a three actuator platform.
It can be fitted at the front instead of the rear if your cockpit layout suits that better. The geometry is the same either way, and the platform is drilled for both.
Two actuators give you pitch and roll with the supplied pivot carrying the other end. Four give you the same axes with more authority and a more even load path. Three sit in between and, for a lot of drivers, are the sweet spot, because the axis you feel most in a car is pitch under braking and a rear centre unit handles that directly.
If three is more than you need, the two or four actuator base is the same platform without the centre bracket. The rest of the motion simulators range covers the complete packages if you would rather buy the actuators and the base together.
The platform is universal. It supports the TRX, TR8, TR8 Pro, TR80, TR80 Lite, RS6, TR120 and TR160, as well as cockpits from other brands, because it works from underneath rather than bolting into a particular frame.
That also means it outlives a chassis upgrade. If you move from a profile rig to a tube frame later, the platform and the actuators come with you. Our racing simulator cockpits pages set out which frames are which if you are planning ahead. Our complete motion rigs cover the same platform supplied with the actuators and controller already in the box.
"If you are choosing between two and four and finding the decision impossible, three is usually the honest answer. The rear centre actuator is doing the axis you actually notice, which is pitch under brakes, and you are not paying for a fourth unit that mostly duplicates its neighbour. Buy this base rather than buying the four corner base and the add-on bracket separately."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
No. This is the platform base and its brackets. D-BOX Gen 5 actuators and the controller are a separate purchase.
This one includes the centre rear motor bracket that a three actuator layout needs. The other base does not, and covers two and four actuator layouts only.
Yes. The bracket can be fitted at the front or the rear, and the platform is drilled for both.
One Trak Racer platform, four motion actuator brackets, one centre rear motor bracket, one motion platform pivot and all the mounting hardware.
Actuator compatibility: D-BOX Gen 5
Layouts supported: Two, three or four actuators
Actuator brackets: 4 corner brackets plus 1 centre motor bracket
Pivot: 1, for the two actuator layout
Cockpit compatibility: Trak Racer tube and profile cockpits, plus other brands
Hardware: All mounting hardware included
Warranty: 5 years
1 x Trak Racer motion platform
4 x motion actuator brackets
1 x centre rear or front motor bracket
1 x motion platform pivot
All mounting hardware
This Trak Racer motion platform base is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
Three actuators is the layout a lot of experienced drivers land on. Two at the front doing the work you feel through the wheel and the pedals, one in the centre at the rear carrying the pitch. It is a genuine step up from two without the cost of four.
This is the TR Move platform supplied with the centre motor bracket that layout needs, plus the four corner brackets and the pivot, so the same base also covers two and four actuator setups if you change your mind. D-BOX Gen 5 actuators are a separate purchase.
A corner bracket holds an actuator at the edge of the platform. The centre rear motor bracket holds one in the middle of the rear rail instead, on the centreline of the rig. That single part is what turns a four corner platform into a three actuator platform.
It can be fitted at the front instead of the rear if your cockpit layout suits that better. The geometry is the same either way, and the platform is drilled for both.
Two actuators give you pitch and roll with the supplied pivot carrying the other end. Four give you the same axes with more authority and a more even load path. Three sit in between and, for a lot of drivers, are the sweet spot, because the axis you feel most in a car is pitch under braking and a rear centre unit handles that directly.
If three is more than you need, the two or four actuator base is the same platform without the centre bracket. The rest of the motion simulators range covers the complete packages if you would rather buy the actuators and the base together.
The platform is universal. It supports the TRX, TR8, TR8 Pro, TR80, TR80 Lite, RS6, TR120 and TR160, as well as cockpits from other brands, because it works from underneath rather than bolting into a particular frame.
That also means it outlives a chassis upgrade. If you move from a profile rig to a tube frame later, the platform and the actuators come with you. Our racing simulator cockpits pages set out which frames are which if you are planning ahead. Our complete motion rigs cover the same platform supplied with the actuators and controller already in the box.
"If you are choosing between two and four and finding the decision impossible, three is usually the honest answer. The rear centre actuator is doing the axis you actually notice, which is pitch under brakes, and you are not paying for a fourth unit that mostly duplicates its neighbour. Buy this base rather than buying the four corner base and the add-on bracket separately."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
No. This is the platform base and its brackets. D-BOX Gen 5 actuators and the controller are a separate purchase.
This one includes the centre rear motor bracket that a three actuator layout needs. The other base does not, and covers two and four actuator layouts only.
Yes. The bracket can be fitted at the front or the rear, and the platform is drilled for both.
One Trak Racer platform, four motion actuator brackets, one centre rear motor bracket, one motion platform pivot and all the mounting hardware.
Actuator compatibility: D-BOX Gen 5
Layouts supported: Two, three or four actuators
Actuator brackets: 4 corner brackets plus 1 centre motor bracket
Pivot: 1, for the two actuator layout
Cockpit compatibility: Trak Racer tube and profile cockpits, plus other brands
Hardware: All mounting hardware included
Warranty: 5 years
1 x Trak Racer motion platform
4 x motion actuator brackets
1 x centre rear or front motor bracket
1 x motion platform pivot
All mounting hardware
This Trak Racer motion platform base is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
