- Description
- Specifications
- What's In The Box?
- Warranty
- Shipping
- 100 Day FREE Returns
- Why Buy From Us?
Description
Trak Racer RE2 Dual-Lock Reclining Sim Racing Seat, Black Diamond Stitch
Reclining seats have a reputation for going soft under load, and for most of them it is deserved. The RE2 is Trak Racer's answer to why, and this is the all-black version of it.
A reclining seat normally locks its backrest from one side only, which leaves the other side free to flex. Under a strong wheelbase that shows up as a backrest that twists slightly with load, and it is the reason a lot of drivers give up on recliners and go back to a fixed bucket.
This one locks from both sides, on a welded tubular steel frame, finished in premium diamond-stitched PU leather. It sits with the rest of the racing seats we carry.
Key features
- Dual-side steel locking recliner assemblies
- Welded tubular steel frame
- Reinforced shoulder structure and cross-braced base
- Premium diamond-stitched pu leather upholstery
- Supportive cold-moulded foam
- Double stitched with high-strength nylon thread
- Bottom-mount fitting for rails and sliders
- Assembles in approximately 15 to 20 minutes
Locked from both sides
The dual-side locking assemblies are the whole design argument. Steel recliners on both sides of the seat mean the backrest is held at two points rather than one, which removes the torsional flex that single-sided recliners live with.
In practice that is the difference between a reclining seat you can run with high torque direct drive and one you cannot. Every input through the wheel loads the backrest, and a backrest that gives even a little is movement you are bracing against rather than driving through.
The frame underneath is welded tubular steel with a reinforced shoulder structure and a cross-braced base, so the rigidity is not resting on the recliners alone.
One rig, more than one seating position
Recline matters more than people expect once a rig does more than one job. A formula seating position wants the backrest well reclined and the pedals far forward; a GT or truck position wants you far more upright. On a fixed bucket you compromise between them.
The same applies to sharing. Two drivers with different builds can each have a position rather than splitting the difference, and it takes seconds rather than a rebuild.
Assembly onto compatible bottom-mount rails or sliders takes roughly 15 to 20 minutes.
The diamond stitching is the visual signature here. Quilted panels across the centre of the base and backrest break up what would otherwise be a large flat expanse of black, which is why this finish photographs better than a plain one and why it reads as a road-car seat rather than a track item.
All-black also disappears into a rig rather than competing with it. If your cockpit already has colour in the frame or the wheel, this is the finish that lets those be the accent.
Mounting, fit and the other colourway
This is a bottom-mount seat, fixing underneath rather than at the sides. That is the compatibility fact to check first, because bottom and side mounting are not interchangeable on a given frame. Sliders are sold separately and are in the seat mounts and sliders.
Trak Racer give a recommended waist range of 28 to 44 inches. Compatible frames include the tube frames, the RS6, TR8 PRO, TRX, Porsche 91XTR and Carbon Fibre TRX, and the extrusion frames, the TR200, TRA, TR160, TR120, TR80S, TR40S and TRK, plus many third-party rigs where suitable bottom-mount rails are used. Supported motion systems include D-BOX, Sigma Integrale and Qubic Systems.
The same seat is available as the RE2 in Black and Red if you prefer that finish. If you would rather have a fixed bucket, the fibreglass seats in the racing seats are the alternative.
Our expert take
"Dual-side locking is the specification that makes a reclining sim seat viable at high torque. Single-sided recliners are fine on a belt-driven wheel and start to feel vague on direct drive, and most buyers never find out why."
"Recline earns its place the moment your rig does more than one thing. Formula and GT seating positions are genuinely different, and switching between them on a fixed bucket means living with a compromise in both."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
Frequently asked questions
What makes it different to other reclining seats?
It locks the backrest from both sides using steel recliner assemblies, where most reclining seats lock from one side only. That removes the torsional flex single-sided recliners have.
How does it mount?
Bottom mount, fixing underneath the seat to compatible rails, sliders or simulator frames. Sliders are sold separately.
What size driver does it suit?
Trak Racer give a recommended waist range of 28 to 44 inches. Assembly onto compatible rails takes approximately 15 to 20 minutes.
Is it available in another colour?
Yes, the same seat is offered as the RE2 in Black and Red.
Specifications
Type: Reclining sim racing seat
SKU: SA-08-L2
Recline lock: Dual-side steel locking recliner assemblies
Frame: Welded tubular steel, reinforced shoulder structure, cross-braced base
Upholstery: Premium performance diamond-stitched PU leather, wear-resistant, UV-resistant, easy-clean
Colour: Black Diamond Stitch
Foam: Supportive cold-moulded
Stitching: Double stitched, high-strength nylon, reinforced wear areas
Mounting: Bottom mount
Recommended waist: 28 to 44 inches
Assembly time: Approximately 15 to 20 minutes
Compatible tube frames: RS6, TR8 PRO, TRX, Porsche 91XTR and Carbon Fibre TRX
Compatible extrusion frames: TR200, TRA, TR160, TR120, TR80S, TR40S and TRK
Supported motion systems: D-BOX, Sigma Integrale and Qubic Systems
Seat sliders: Sold separately
Warranty: 2 years frame, 1 year upholstery
What's In The Box?
1x Trak Racer RE2 dual-lock reclining sim racing seat
Warranty
This Trak Racer seat is backed by a 2-year limited manufacturer warranty on the welded steel frame and a 1-year limited warranty on the upholstery and stitching, covering manufacturing defects under standard residential use.
Normal wear, marks, scratches, accidental damage and misuse sit outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Shipping
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
- VIC: 2–4 business days
- NSW: 2–4 business days
- ACT: 3–5 business days
- QLD: 2–4 business days
- SA: 2–4 business days
- WA: 4–10 business days
- NT: 4–10 business days
- TAS: 4–10 business days
Click here to view our full shipping & handling policy
100 Day FREE Returns
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Why Buy From Us?
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 30-day returns
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
- Expert guidance on choosing the right gaming gear for your goals and budget
- Personalised setup advice tailored to your space and gaming needs
- Smart gear pairing suggestions for PCs, consoles, monitors, keyboards, controllers and accessories
- Dedicated account representative for ongoing support
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
Trusted by professionals
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.