- Description
- Specifications
- What's In The Box?
- Warranty
- Shipping
- 100 Day FREE Returns
- Why Buy From Us?
Description
Trak Racer 10W Pro Haptic Bass Shaker (Set of 2)
Two compact tactile transducers meant for a job the big shakers cannot do: mounting directly to your pedals, shifter and handbrake so the feedback arrives where your hands and feet actually are.
That distinction matters more than the wattage suggests. In a real car you read grip, ABS and drivetrain load through your feet and hands, not through your back. A shaker bolted to the pedal plate gives you ABS chatter and lockup cues you can act on, which is far easier to interpret than the same information smeared through the whole seat.
Each unit runs 10W nominal and 20W peak from 33Hz to 100Hz, in a 98mm square body 31mm deep. Brackets, fasteners and tools are included. See the wider haptic systems range.
Key features
- 2x 10W tactile transducers
- 2m of speaker wire
- Mounting brackets and full fastener kit
- Installation tools included
- 10W nominal, 20W maximum input
- Effective range 33Hz to 100Hz
- 8 ohm rated AC impedance
- Compact 98 x 98 x 31mm body
Pedals, shifter, handbrake: what each one gives you
On the pedals you get ABS activation through the brake, the moment of lockup as you pass the threshold, wheelspin through the throttle, and the road texture underneath. That is the highest-value mounting point of the three, because braking is where most lap time is found and lost.
On a shifter the shaker adds mechanical engagement through each gear change and drivetrain vibration under load, which cures the dead feel of static hardware in H-pattern and sequential setups. On a handbrake it gives you rear slip and surface feel, which is genuinely useful for timing a drift or a rally hairpin. Have a look at the pedals, shifters and handbrakes they attach to.
Small on purpose
Ten watts sounds modest next to a 100W chassis shaker, and it is meant to. A control-mounted transducer has to move a pedal face or a shifter body, not a whole rig and a driver, so the power that would be right for the floor would just be noise here.
The practical upside is that these are quiet. A big shaker excites the room as much as the rig, which is a real problem in an apartment or a shared house at night. These stay local, draw very little power and run happily off a compact amp. With software like SimHub you can tune each one separately by effect and frequency so the cues stay clean instead of blurring into each other.
One thing to plan for: like all transducers, they need an amplifier, sold separately.
Frequently asked questions
How many shakers are in the set?
Two, along with 2m of speaker wire, mounting brackets, a full fastener kit and installation tools.
Where do they mount?
Directly to pedals, shifters and handbrakes, or to cockpit frames and seats where a compact transducer suits.
Do I need an amplifier?
Yes. These are transducers, not powered speakers. A dedicated low-frequency amplifier is required and sold separately.
Should I buy these or the 100W shaker?
Different jobs. The 100W moves the whole rig for deep, body-felt effects; these give localised detail at the controls. Many rigs run both. See the racing simulator accessories range.
Specifications
Part number: TR-BSA10
Type: Low frequency tactile transducer, bass shaker
Quantity: Set of 2
Outer dimensions: 98mm x 98mm x 31mm each
Rated AC impedance: 8 ohm, plus or minus 10 percent at 22C
Rated DC resistance: 7.2 ohm, plus or minus 3 percent at 22C
Resonant frequency: 33Hz, plus or minus 10 percent
Effective frequency range: 33Hz to 100Hz
Nominal input power: 10W
Maximum input power: 20W
Buzz and rattle test: 8V, 20Hz to 200Hz
Operating condition: 8Vrms sine wave at 20Hz to 200Hz without distortion
Polarity: Positive terminal causes upward magnetic movement at 1.5V DC
Magnet: 60mm x 32mm x 8mm
Product weight: 0.35kg each
Intended mounting: Pedals, shifters, handbrakes, cockpit frames and seats
Software: Tunable per unit with SimHub and similar
Amplifier: Required, sold separately
Warranty: 1 year, excluding normal wear and tear
What's In The Box?
2x 10W low-frequency bass shakers
2m of speaker wire
Mounting brackets and full fastener kit
Installation tools
Warranty
This Trak Racer accessory is backed by a 1-year limited manufacturer warranty covering defects in materials and workmanship under normal residential and commercial simulation use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
Shipping
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
- VIC: 2–4 business days
- NSW: 2–4 business days
- ACT: 3–5 business days
- QLD: 2–4 business days
- SA: 2–4 business days
- WA: 4–10 business days
- NT: 4–10 business days
- TAS: 4–10 business days
Click here to view our full shipping & handling policy
100 Day FREE Returns
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Why Buy From Us?
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 30-day returns
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
- Expert guidance on choosing the right gaming gear for your goals and budget
- Personalised setup advice tailored to your space and gaming needs
- Smart gear pairing suggestions for PCs, consoles, monitors, keyboards, controllers and accessories
- Dedicated account representative for ongoing support
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
Trusted by professionals
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.