The QRT Grid-Q racing seat is all about support where it counts without adding unnecessary weight.
Thanks to its ultra-light fibreglass shell made with Sparco’s QRT technology, it comes in at just 6.8kg while still meeting FIA 8855-1999 standards.
Its Velcro-attached cushions can be adjusted or removed, letting you dial in the right fit and airflow.
Side bolsters give you solid lateral support, and harness slots accommodate a wide range of setups.
It's also fully HANS compatible and designed for side mounting because one size never fits all in racing.
Fitting into a racing seat shouldn’t feel like a compromise or a squeeze.
The QRT Grid-Q racing seat gives drivers with up to a 36-inch waist the room to focus on the road, instead of fussing with their seat.
The wider shell hugs your body without cutting into it, locking you in place when the G-forces hit.
It’s not just about space—it’s about control, safety, and confidence every time you strap in.
Shaving off unnecessary weight without compromising strength is rare, but the Grid-Q racing seat does exactly that.
Thanks to its QRT fibreglass shell, this seat is up to 30% lighter than traditional composite models.
That means quicker response and less strain on your rig.
It weighs just 6.8kg, making it easier to handle during installation and friendlier to your power-to-weight ratio.
It’s engineered to stay strong and firm so you get performance without compromise.
Hard braking, sharp turns, sudden weight shifts—this is where the QRT Grid-Q racing seat proves its worth.
Deep side and shoulder bolsters hold you tight without feeling restrictive.
You stay planted through every corner, even when the G-forces start climbing.
No sliding, no second-guessing your position—just full control, every time.
It’s the kind of locked-in feel that builds trust between you and the car.
Whether you're hitting apexes or dodging traffic on track days, that secure fit gives you one less thing to think about when things get intense.
Fitting into a race seat shouldn’t feel like squeezing into a mould.
The QRT Grid-Q racing seat solves that with removable side cushions that give broader drivers the space they need.
It’s a flexible setup—pop them out for extra room or leave them in for a snugger fit.
No awkward pressure on your hips or fighting the seat to get comfortable.
You get the same lateral support without the compromise.
Finally, a seat that adapts to your body instead of forcing your body to adapt to it.
When you're pushing limits, you need gear that’s been tested to hold up.
The QRT Grid-Q racing seat carries FIA 8855-1999 approval, which means it’s passed strict standards for safety and durability.
It’s your assurance that the seat is built to perform under serious stress.
From the shell construction to harness compatibility, every part is track-proven and race-ready.
You know it’s been through the fire and cleared for action when it matters most.
Your harness setup shouldn't be limited by your seat, and with the QRT Grid-Q, it isn’t.
This seat is fully HANS-compatible and built with wide harness slots to handle a range of configurations.
Whether you’re running a standard 4-point or a more aggressive 6-point setup, it’s designed to work with your gear, not against it.
That means better fitment, better safety, and less time fiddling with hardware.
It’s all about giving you flexibility without compromising on security because every detail matters when you're locking in for a serious drive.
Yes, it’s designed to fit drivers with waists up to 36 inches. Plus, the removable side cushions give you extra flexibility—pop them out if you need a bit more room around the hips without losing side support.
Just 6.8kg. That’s thanks to the QRT fiberglass shell, which cuts weight by around 30% compared to standard seats. It’s perfect for anyone trying to improve their power-to-weight ratio without giving up safety.
Absolutely. The Sparco QRT Grid-Q is fully HANS-compatible and features wide harness slots to work with different setups. So whether you’re running a 4-, 5-, or 6-point harness, it’s ready to go.
It’s FIA 8855-1999 approved. That means it’s passed serious crash and strength tests. If you’re planning to hit the track or compete, you’re covered.
It gives you more control over fit and comfort. You can adjust the level of support, improve airflow, or just make room if you’ve got a larger frame. It’s a modular approach that adapts to how you want to drive.
It’s primarily built for track use, but that doesn’t mean it’s uncomfortable. Just know it’s a fixed-back racing seat—it’s about support and safety, not lounging. Great for dedicated track builds or weekend warriors.
Yes, the Sparco QRT Grid-Q uses side mounting points, which are standard for most racing setups. Just make sure your brackets line up with the seat’s bolt pattern and you’re good to go.
It’s lighter, more adjustable, and offers better fit flexibility thanks to the Velcro-mounted pads. The QRT process makes it stronger and lighter than older models, and the cushion design lets you tailor it to your build—not the other way around.
Weight
6.8 kg
Approval
FIA 8855-1999
Brand
Sparco Seats
Construction
Fibreglass seats
Brackets included
Seat only
Coloured Shell
Black
Driver Waist Size
Up to 36"
Fixing Type
Side mount
HANS Compatibility
HANS Friendly
Harness compatibility
6 point compatible
Mechanism Type
Fixed Back Seats
Seat Model
Grid Q
Trim Material
Fabric
1x Sparco QRT Grid-Q Racing Seat
User manual
Installation accessories
All Sparco gear is backed by a one year local warranty. This warranty covers you against manufacturer defects.
If for some reason your item doesn't work as expected, simply contact us and we'll either repair your item under warranty or we may be able to offer a refund/exchange. Again, if for some reason your item doesn't work as expected, contact us right away and we'll sort out any issues ASAP.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? You can return unused, unopened items within 30 days of your order date, provided they’re in original packaging and resaleable condition. Change-of-mind returns require the customer to cover return shipping.
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.
The QRT Grid-Q racing seat is all about support where it counts without adding unnecessary weight.
Thanks to its ultra-light fibreglass shell made with Sparco’s QRT technology, it comes in at just 6.8kg while still meeting FIA 8855-1999 standards.
Its Velcro-attached cushions can be adjusted or removed, letting you dial in the right fit and airflow.
Side bolsters give you solid lateral support, and harness slots accommodate a wide range of setups.
It's also fully HANS compatible and designed for side mounting because one size never fits all in racing.
Fitting into a racing seat shouldn’t feel like a compromise or a squeeze.
The QRT Grid-Q racing seat gives drivers with up to a 36-inch waist the room to focus on the road, instead of fussing with their seat.
The wider shell hugs your body without cutting into it, locking you in place when the G-forces hit.
It’s not just about space—it’s about control, safety, and confidence every time you strap in.
Shaving off unnecessary weight without compromising strength is rare, but the Grid-Q racing seat does exactly that.
Thanks to its QRT fibreglass shell, this seat is up to 30% lighter than traditional composite models.
That means quicker response and less strain on your rig.
It weighs just 6.8kg, making it easier to handle during installation and friendlier to your power-to-weight ratio.
It’s engineered to stay strong and firm so you get performance without compromise.
Hard braking, sharp turns, sudden weight shifts—this is where the QRT Grid-Q racing seat proves its worth.
Deep side and shoulder bolsters hold you tight without feeling restrictive.
You stay planted through every corner, even when the G-forces start climbing.
No sliding, no second-guessing your position—just full control, every time.
It’s the kind of locked-in feel that builds trust between you and the car.
Whether you're hitting apexes or dodging traffic on track days, that secure fit gives you one less thing to think about when things get intense.
Fitting into a race seat shouldn’t feel like squeezing into a mould.
The QRT Grid-Q racing seat solves that with removable side cushions that give broader drivers the space they need.
It’s a flexible setup—pop them out for extra room or leave them in for a snugger fit.
No awkward pressure on your hips or fighting the seat to get comfortable.
You get the same lateral support without the compromise.
Finally, a seat that adapts to your body instead of forcing your body to adapt to it.
When you're pushing limits, you need gear that’s been tested to hold up.
The QRT Grid-Q racing seat carries FIA 8855-1999 approval, which means it’s passed strict standards for safety and durability.
It’s your assurance that the seat is built to perform under serious stress.
From the shell construction to harness compatibility, every part is track-proven and race-ready.
You know it’s been through the fire and cleared for action when it matters most.
Your harness setup shouldn't be limited by your seat, and with the QRT Grid-Q, it isn’t.
This seat is fully HANS-compatible and built with wide harness slots to handle a range of configurations.
Whether you’re running a standard 4-point or a more aggressive 6-point setup, it’s designed to work with your gear, not against it.
That means better fitment, better safety, and less time fiddling with hardware.
It’s all about giving you flexibility without compromising on security because every detail matters when you're locking in for a serious drive.
Yes, it’s designed to fit drivers with waists up to 36 inches. Plus, the removable side cushions give you extra flexibility—pop them out if you need a bit more room around the hips without losing side support.
Just 6.8kg. That’s thanks to the QRT fiberglass shell, which cuts weight by around 30% compared to standard seats. It’s perfect for anyone trying to improve their power-to-weight ratio without giving up safety.
Absolutely. The Sparco QRT Grid-Q is fully HANS-compatible and features wide harness slots to work with different setups. So whether you’re running a 4-, 5-, or 6-point harness, it’s ready to go.
It’s FIA 8855-1999 approved. That means it’s passed serious crash and strength tests. If you’re planning to hit the track or compete, you’re covered.
It gives you more control over fit and comfort. You can adjust the level of support, improve airflow, or just make room if you’ve got a larger frame. It’s a modular approach that adapts to how you want to drive.
It’s primarily built for track use, but that doesn’t mean it’s uncomfortable. Just know it’s a fixed-back racing seat—it’s about support and safety, not lounging. Great for dedicated track builds or weekend warriors.
Yes, the Sparco QRT Grid-Q uses side mounting points, which are standard for most racing setups. Just make sure your brackets line up with the seat’s bolt pattern and you’re good to go.
It’s lighter, more adjustable, and offers better fit flexibility thanks to the Velcro-mounted pads. The QRT process makes it stronger and lighter than older models, and the cushion design lets you tailor it to your build—not the other way around.
Weight
6.8 kg
Approval
FIA 8855-1999
Brand
Sparco Seats
Construction
Fibreglass seats
Brackets included
Seat only
Coloured Shell
Black
Driver Waist Size
Up to 36"
Fixing Type
Side mount
HANS Compatibility
HANS Friendly
Harness compatibility
6 point compatible
Mechanism Type
Fixed Back Seats
Seat Model
Grid Q
Trim Material
Fabric
1x Sparco QRT Grid-Q Racing Seat
User manual
Installation accessories
All Sparco gear is backed by a one year local warranty. This warranty covers you against manufacturer defects.
If for some reason your item doesn't work as expected, simply contact us and we'll either repair your item under warranty or we may be able to offer a refund/exchange. Again, if for some reason your item doesn't work as expected, contact us right away and we'll sort out any issues ASAP.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? You can return unused, unopened items within 30 days of your order date, provided they’re in original packaging and resaleable condition. Change-of-mind returns require the customer to cover return shipping.
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.
