- Description
- Specifications
- What's In The Box?
- Warranty
- Shipping
- 100 Day FREE Returns
- Why Buy From Us?
Description
A hand laid carbon formula wheel with 123 inputs and a 5 inch touchscreen
Most carbon sim wheels are a carbon skin over a metal frame. This one is not. Rexing hand lay the Mayaris 2 as a full carbon fibre epoxy composite, every layer oriented for stiffness, then vacuum bag and autoclave cure it. There is no internal metal reinforcement because the carbon chassis does not need any.
That is why a 290mm wheel with a 5 inch touchscreen, 17 RGB LEDs, three OLED screens and 123 inputs still comes in at 1.15kg. Our sim racing wheels range covers the alternatives.
Key features
- Full carbon fibre body, hand laid and autoclave cured
- No internal metal reinforcement required
- 5 inch touchscreen at 854 x 480
- 11 RPM and 6 marshal RGB LEDs, all telemetry configurable
- 123 available inputs
- 10 RGB illuminated push buttons
- 6 thumb rotary encoders from Alps and Elma
- 3 OLED screens with custom text
- Magnetic hall sensor paddle shifters
- Analogue clutch paddles with digital bite point
The carbon is the product
Every layer is oriented deliberately, which is what a real motorsport component does and what a cosmetic carbon wrap does not. The result is a chassis that is stiff in the directions that matter under load and light everywhere else.
Rexing build each one by hand in Croatia, and they are open about what that means: a hand laid carbon or polyurethane surface can carry minor cosmetic variation, and that is normal in a handmade product rather than a fault. The trade is a wheel that is genuinely lighter and stiffer than a moulded one.
What 123 inputs actually means
Ten RGB illuminated push buttons, their brightness and colour set in SimHub. Three central switches with RGB backlight: two eight position switches and an encoder with a push function, each labelled live on its own OLED screen so you always know what it is currently mapped to.
Two multi switches that work simultaneously as a rotary encoder, a digital joystick and a button. Six thumb rotary encoders, two upper Alps units with a softer click and four Elma units with a firmer, more defined one, the middle left and right also pushing. Self adhesive labels are supplied for the lot.
The paddles, and the clutch
The shifters are magnetic with hall sensors and no switches inside, so there is nothing to wear out and nothing to develop a double tap. Rubber stops cut the click noise, which matters more than it sounds on a long stint with a headset on.
The clutch paddles are analogue: hall sensor filtered with linear output, a digitally adjustable bite point and two modes, fixed main and secondary or auto priority. Six bite point presets save on the wheel itself, so a standing start in one car and another is a switch rather than a recalibration.
Screen, LEDs and SimHub
The 5 inch touchscreen runs at 854 x 480 with RGB LEDs surrounding it, all fully customisable. Eleven of those are RPM LEDs and six are marshal LEDs, and every one can be driven from telemetry data with adjustable brightness and colour.
SimHub support is native, which is what configures the buttons, the screen layouts and the LED behaviour. Firmware updates are a drag and drop onto a drive the wheel exposes, with no utility to install. Advanced features including quick shift, brake magic and throttle hold need firmware 1.041 or later.
Mounting it
The aluminium hub on the back accepts both 50.8mm and 70mm patterns directly, so there is no adapter plate to buy for the common wheelbases and quick releases. Rexing name Simucube, the Fanatec Podium Hub and Asetek among them.
On a threaded Simucube quick release you need M5 x 10mm bolts and an 8mm wrench. On a formula release without threads it is M5 x 16mm with nuts. A Simucube wheel side quick release is the part if you are on a Simucube 2. Our quick releases cover the options.
Power and connection
A non proprietary connector on the back takes the supplied high quality USB spiral cable straight to the PC, so the wheel is USB bus powered and there is no separate power supply to find a socket for.
Rexing recommend a powered USB hub for maximum brightness across the screen and LEDs, and note it is the fix if a wheel ever shuts down. It is a recommendation rather than a requirement: the wheel works without one. Keep the USB run to around two metres.
Our expert take
"The thing that separates this from the other carbon formula wheels is that the carbon is structural rather than decorative. A lot of rims are an aluminium plate with a carbon face glued on, and they weigh what an aluminium plate weighs. This one is a genuine composite chassis, and you feel the difference the moment you pick it up."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
Frequently asked questions
Does it fit a Simucube?
Yes. The aluminium hub accepts 70mm directly, so a Simucube wheel side quick release and M5 x 10mm bolts are all you need. No Rexing specific adapter is required.
Do I need a powered USB hub?
No, it is a recommendation rather than a requirement. Rexing suggest one for maximum LED and screen brightness, and it is the fix if the wheel ever shuts down, but the wheel runs without one.
What software configures it?
SimHub, natively. The buttons, screen layouts and LED behaviour are all set there. Firmware updates are a drag and drop, with no separate utility to install.
How many paddles does it have?
Four as standard: two magnetic hall shifters and two analogue hall clutch paddles. Rexing also offer an optional third set with dual action, giving four configurable positions across two paddles.
Are mounting bolts supplied?
No. The manual specifies M5 x 10mm for threaded bases such as Simucube, or M5 x 16mm with nuts for formula releases without threads.
What is the rim diameter?
290mm. The 360 x 240 x 150mm figure quoted on spec sheets is an overall three axis measurement of the wheel rather than a rim diameter.
Specifications
Body: Full carbon fibre, hand laid, vacuum bag and autoclave cured
Internal reinforcement: None required
Grips: Polyurethane rubber
Knobs and bezel: Aluminium
Hub: Aluminium, accepts 50.8mm and 70mm
Rim diameter: 290mm
Weight: 1.15kg
Dimensions: 360 x 240 x 150mm
Processor: Dual core ARM with a 4 layer PCB
Display: 5 inch touchscreen, 854 x 480
Secondary displays: 3 OLED screens with custom text
RGB LEDs: 11 RPM plus 6 marshal, telemetry configurable
Total inputs: 123
Push buttons: 10, RGB illuminated
Central switches: 2 x 8-position plus 1 encoder with push, RGB backlit
Multi switches: 2, acting as encoder, joystick and button
Thumb encoders: 6 (2 Alps, 4 Elma, middle left and right with push)
Shifter paddles: Magnetic, hall sensor, rubber stopped
Clutch paddles: Analogue hall, linear output, digital bite point, 2 modes
Bite point presets: 6, saved on the wheel
Software: Native SimHub support
Firmware: Drag and drop, 1.041 or later for advanced features
Power: USB bus powered, powered hub recommended for maximum brightness
Connection: Non proprietary connector, USB spiral cable supplied
Mounting bolts: M5 x 10mm threaded, or M5 x 16mm with nuts
Platform: PC
Made in: Croatia
Warranty: 2 years
What's In The Box?
1 x Rexing Mayaris 2 steering wheel
1 x high quality USB spiral cable
Self-adhesive labels for the push buttons
Additional labelling set for custom configurations
Warranty
This Rexing steering wheel carries a two-year warranty against defects in material or workmanship under normal use and maintenance, beginning from the date of purchase. Rexing's cover is transferable, and any part they repair or replace starts a fresh two-year period of its own.
Rexing build these wheels by hand, and they are explicit that minor cosmetic variation in a hand laid carbon or polyurethane surface is normal rather than a fault. Structural and electronic defects are covered.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced through authorised distribution, and our Australian simulation team is only a call or email away.
All products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Shipping
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
- VIC: 2–4 business days
- NSW: 2–4 business days
- ACT: 3–5 business days
- QLD: 2–4 business days
- SA: 2–4 business days
- WA: 4–10 business days
- NT: 4–10 business days
- TAS: 4–10 business days
Click here to view our full shipping & handling policy
100 Day FREE Returns
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Why Buy From Us?
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
- Expert guidance on choosing the right gear for your goals and budget
- Personalised setup advice tailored to your space and the way you play
- Smart gear pairing suggestions for PCs, consoles, monitors, wheels, controllers and accessories
- A dedicated account representative for ongoing support
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.