Pedals that bolt individually to profile are endlessly adjustable and slightly annoying. Every time you want to change your seating position you are undoing six bolts instead of two, and your heels are resting on whatever happens to be underneath them.
This base plate fixes both. Two lengths of aluminium profile carry the pedals as one assembly, and a steel heel rest gives your feet an anchor point. Our pedal accessories cover the rest of the supporting hardware.
Without one, your heel either floats or rests on the floor of the rig at whatever height that happens to be. Neither gives you a fixed reference, and a brake pedal you are pushing from an unstable foot position is a brake pedal you cannot repeat.
With an anchor point, the ankle becomes the joint doing the work rather than the whole leg. That is how it works in a car, and it is why trail braking gets more consistent almost immediately after fitting one.
The heel rest sets to the height and recline that suit your seating position, so a reclined formula position and an upright GT position are both catered for. It is a setup adjustment rather than something you change between sessions.
The two profiles let you place the pedals anywhere along their length. Narrow them for a formula footwell or spread them for a road car feel, and set the brake wherever your right foot naturally falls rather than where a fixed plate decided.
Mounting holes on both sides take the pedal controller box, which keeps it off the floor of the rig and keeps the GX12 runs short and tidy. Left or right is your choice depending on where the USB run is easiest.
It is designed around the VNM Load Cell Pedal Set, and the whole assembly then bolts into a rig as one piece. Our VNM Simulation range covers the full set of components.
"This is the accessory people skip and then buy three months later. Pedals mounted straight to profile work fine, right up until you want to move your seat. Then you are on the floor with an allen key re-squaring everything. Buy it at the same time as the pedals and save yourself the exercise."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
It is built around aluminium profile mounting, which is what the great majority of sim rigs use for a pedal deck. Check the profile size and slot spacing on your own rig before ordering.
Included. This is the base plate and heel rest together as one product.
Yes. The pedals slide anywhere along the two aluminium profiles, so spacing stays completely free.
No. This is the mounting hardware on its own. The pedal set is a separate purchase.
Type: Pedal base plate with heel rest
Heel rest material: Steel
Heel rest finish: Static proof black paint
Heel rest adjustment: Height and angle
Pedal mounting: Two aluminium profiles, free positioning
Controller box mounting: Holes on both sides
Pedals included: No
Warranty: 1 year
1 x heel rest face plate
1 x left heel rest holder
1 x right heel rest holder
2 x aluminium profile
Mounting bolts, T nuts and washers
This VNM Simulation pedal base plate is covered by a 12-month warranty against defects in materials and workmanship, beginning from the date of purchase.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced through authorised distribution, and our Australian simulation team is only a call or email away.
All products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
Pedals that bolt individually to profile are endlessly adjustable and slightly annoying. Every time you want to change your seating position you are undoing six bolts instead of two, and your heels are resting on whatever happens to be underneath them.
This base plate fixes both. Two lengths of aluminium profile carry the pedals as one assembly, and a steel heel rest gives your feet an anchor point. Our pedal accessories cover the rest of the supporting hardware.
Without one, your heel either floats or rests on the floor of the rig at whatever height that happens to be. Neither gives you a fixed reference, and a brake pedal you are pushing from an unstable foot position is a brake pedal you cannot repeat.
With an anchor point, the ankle becomes the joint doing the work rather than the whole leg. That is how it works in a car, and it is why trail braking gets more consistent almost immediately after fitting one.
The heel rest sets to the height and recline that suit your seating position, so a reclined formula position and an upright GT position are both catered for. It is a setup adjustment rather than something you change between sessions.
The two profiles let you place the pedals anywhere along their length. Narrow them for a formula footwell or spread them for a road car feel, and set the brake wherever your right foot naturally falls rather than where a fixed plate decided.
Mounting holes on both sides take the pedal controller box, which keeps it off the floor of the rig and keeps the GX12 runs short and tidy. Left or right is your choice depending on where the USB run is easiest.
It is designed around the VNM Load Cell Pedal Set, and the whole assembly then bolts into a rig as one piece. Our VNM Simulation range covers the full set of components.
"This is the accessory people skip and then buy three months later. Pedals mounted straight to profile work fine, right up until you want to move your seat. Then you are on the floor with an allen key re-squaring everything. Buy it at the same time as the pedals and save yourself the exercise."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
It is built around aluminium profile mounting, which is what the great majority of sim rigs use for a pedal deck. Check the profile size and slot spacing on your own rig before ordering.
Included. This is the base plate and heel rest together as one product.
Yes. The pedals slide anywhere along the two aluminium profiles, so spacing stays completely free.
No. This is the mounting hardware on its own. The pedal set is a separate purchase.
Type: Pedal base plate with heel rest
Heel rest material: Steel
Heel rest finish: Static proof black paint
Heel rest adjustment: Height and angle
Pedal mounting: Two aluminium profiles, free positioning
Controller box mounting: Holes on both sides
Pedals included: No
Warranty: 1 year
1 x heel rest face plate
1 x left heel rest holder
1 x right heel rest holder
2 x aluminium profile
Mounting bolts, T nuts and washers
This VNM Simulation pedal base plate is covered by a 12-month warranty against defects in materials and workmanship, beginning from the date of purchase.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced through authorised distribution, and our Australian simulation team is only a call or email away.
All products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
