Based on .... T&Cs Apply.
The compact single-arm kit: one 240mm aluminium profile support with two mounting plates, for controls that sit close to the cockpit rather than wide of it. It sits with the flight simulator controls we stock.
A 240mm arm keeps a joystick or throttle tucked in near the frame, which suits smaller controls, tighter rooms and cockpits where a long arm would foul a monitor stand or a doorway.
Both mounting plates are included, along with every bracket needed to fit it.
Not every setup wants controls sitting wide. A compact stick like a T.16000M or an Extreme 3D Pro does not need 666mm of reach, and in a small room the extra width is a genuine nuisance around doorways and furniture.
240mm keeps the control close to the frame, which also means less leverage on the mounting point and a stiffer feel under load. For a smaller HOTAS or a single-stick setup, the short arm is the better engineering answer as well as the tidier one.
The kit supplies one 240mm support arm and two mounting plates, so a joystick and a throttle are both covered even though only one arm is included. The second plate mounts to whatever support your frame already provides.
If your cockpit has no side supports at all, the two-arm short version is the complete solution and avoids a second order. Both are in the hardware mounts.
"The right choice for a compact stick or a tight room. Keeping the control close to the frame reduces leverage on the mount as well as the footprint, so it feels solid in a way a long arm at full extension does not."
"Bear in mind this is one arm and two plates. If your frame has no existing side support, the second plate has nothing to mount to, so the two-arm short version is the one you want."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The two mounting plates take joysticks, throttles and quadrants from Thrustmaster across the HOTAS Warthog, T.Flight HOTAS One and 4, T.16000M and FCS, the TCA Quadrant, Officer and Sidestick Airbus editions and the TWCS throttle; Logitech and Saitek including the X52, X52 Professional and X56; Honeycomb Alpha and Bravo; Virpil, VKB, Winwing, VirtualFly and Hori. The Honeycomb Bravo attaches using a clamp.
Any aluminium profile cockpit with an 8mm T-slot, including Trak Racer's own extrusion frames and other branded rigs built from the same profile.
240mm, which keeps controls close to the cockpit frame. The long-arm version is 666mm and height adjustable, for controls that need to sit wider.
Yes. Two flight sim mounting plates come with every kit, along with all the brackets and hardware needed to fit it. The controls themselves are separate, and the flight simulator controls covers those.
Type: Flight sim control mount kit, one short side support
Support arms included: 1
Arm length: 240mm
Profile size: 80x40mm
Mounting plates: 2, for joystick and throttle
Finish: Durable matte black
Fitment: Any aluminium profile with an 8mm T-slot
Flight controls: Not included
Warranty: 5 years
1x Aluminium profile support arm, 240mm
2x Flight sim mounting plates
All brackets and mounting hardware
This Trak Racer flight sim control mount is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
The short arm is exactly what I needed for my setup. It keeps the controls close to the cockpit without taking up unnecessary space.
Really impressed with the build quality. The aluminium profile feels very sturdy and the mount stays completely stable while using my joystick.
I have a fairly tight room and the shorter arm works much better than a long side mount. My controls are close and still easy to reach.
Installation was straightforward and all the brackets and hardware I needed were included. Took very little time to get it mounted.
The compact design is the main reason I bought this and it works perfectly. My joystick sits in a much more natural position now.
The compact single-arm kit: one 240mm aluminium profile support with two mounting plates, for controls that sit close to the cockpit rather than wide of it. It sits with the flight simulator controls we stock.
A 240mm arm keeps a joystick or throttle tucked in near the frame, which suits smaller controls, tighter rooms and cockpits where a long arm would foul a monitor stand or a doorway.
Both mounting plates are included, along with every bracket needed to fit it.
Not every setup wants controls sitting wide. A compact stick like a T.16000M or an Extreme 3D Pro does not need 666mm of reach, and in a small room the extra width is a genuine nuisance around doorways and furniture.
240mm keeps the control close to the frame, which also means less leverage on the mounting point and a stiffer feel under load. For a smaller HOTAS or a single-stick setup, the short arm is the better engineering answer as well as the tidier one.
The kit supplies one 240mm support arm and two mounting plates, so a joystick and a throttle are both covered even though only one arm is included. The second plate mounts to whatever support your frame already provides.
If your cockpit has no side supports at all, the two-arm short version is the complete solution and avoids a second order. Both are in the hardware mounts.
"The right choice for a compact stick or a tight room. Keeping the control close to the frame reduces leverage on the mount as well as the footprint, so it feels solid in a way a long arm at full extension does not."
"Bear in mind this is one arm and two plates. If your frame has no existing side support, the second plate has nothing to mount to, so the two-arm short version is the one you want."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The two mounting plates take joysticks, throttles and quadrants from Thrustmaster across the HOTAS Warthog, T.Flight HOTAS One and 4, T.16000M and FCS, the TCA Quadrant, Officer and Sidestick Airbus editions and the TWCS throttle; Logitech and Saitek including the X52, X52 Professional and X56; Honeycomb Alpha and Bravo; Virpil, VKB, Winwing, VirtualFly and Hori. The Honeycomb Bravo attaches using a clamp.
Any aluminium profile cockpit with an 8mm T-slot, including Trak Racer's own extrusion frames and other branded rigs built from the same profile.
240mm, which keeps controls close to the cockpit frame. The long-arm version is 666mm and height adjustable, for controls that need to sit wider.
Yes. Two flight sim mounting plates come with every kit, along with all the brackets and hardware needed to fit it. The controls themselves are separate, and the flight simulator controls covers those.
Type: Flight sim control mount kit, one short side support
Support arms included: 1
Arm length: 240mm
Profile size: 80x40mm
Mounting plates: 2, for joystick and throttle
Finish: Durable matte black
Fitment: Any aluminium profile with an 8mm T-slot
Flight controls: Not included
Warranty: 5 years
1x Aluminium profile support arm, 240mm
2x Flight sim mounting plates
All brackets and mounting hardware
This Trak Racer flight sim control mount is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.