Based on .... T&Cs Apply.
The two-arm long version: left and right aluminium profile supports with two mounting plates, for a cockpit that has no side supports of its own. It sits with the flight simulator controls we stock.
This is the kit to buy if you are starting from a bare extrusion frame and want a joystick on one side and a throttle on the other, both sitting wide enough to match the aircraft.
If your rig is a TR160, it already includes one support arm, so the single-arm version is the one you want instead.
A HOTAS layout needs two mounting points, and most aluminium cockpits ship without either. This kit supplies both arms and both plates, so a stick goes on one side and a throttle on the other in a single purchase.
The alternative, buying a single-arm kit and adding a second arm later, ends up costing more and arriving in two deliveries. If your frame has no side supports, start here.
Trak Racer's own note is clear: if you are installing onto a TR160, take the single-support version instead, because the TR160 already ships with one support arm. Buying this kit for a TR160 leaves you with a spare arm you paid for.
For every other extrusion cockpit, including the TR80, TR120, TR80-LITE and other branded rigs on 8mm T-slot, this is the complete solution. Compare the short-arm versions in the hardware mounts if your controls sit closer in.
"The right buy for a bare extrusion frame. Two arms, two plates, one order, and the long profile supports give a full HOTAS the width it wants."
"Do not buy this for a TR160. That frame already includes one support arm, so you would be paying for one you do not need. Trak Racer says so on their own page and they are right."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The two mounting plates take joysticks, throttles and quadrants from Thrustmaster across the HOTAS Warthog, T.Flight HOTAS One and 4, T.16000M and FCS, the TCA Quadrant, Officer and Sidestick Airbus editions and the TWCS throttle; Logitech and Saitek including the X52, X52 Professional and X56; Honeycomb Alpha and Bravo; Virpil, VKB, Winwing, VirtualFly and Hori. The Honeycomb Bravo attaches using a clamp.
Any aluminium profile cockpit with an 8mm T-slot, including Trak Racer's own extrusion frames and other branded rigs built from the same profile.
Buy this one if your cockpit has no side supports. Buy the single-arm version if you are on a TR160, which already includes one support arm.
Yes. Two flight sim mounting plates come with every kit, along with all the brackets and hardware needed to fit it. The controls themselves are separate, and the flight simulator controls covers those.
Type: Flight sim control mount kit, two side supports
Support arms included: 2, left and right
Profile size: 80x40mm
Mounting plates: 2, for joystick and throttle
Finish: Matte black paint
Fitment: Any aluminium profile with an 8mm T-slot
Not recommended for: TR160, which already includes one support arm
Flight controls: Not included
Warranty: 5 years
2x Aluminium profile support arms, left and right
2x Flight sim mounting plates
All brackets and mounting hardware
This Trak Racer flight sim control mount is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.
Exactly what I needed for my flight sim cockpit. Having a support on both sides gives me a much better HOTAS layout and everything feels very secure.
The aluminium supports are solid and the controls stay firmly in position. No unwanted movement while flying and the overall build quality is excellent.
Installation was straightforward on my aluminium frame. The two mounting plates give plenty of flexibility to position the joystick and throttle comfortably.
Moving my flight controls onto dedicated side mounts made a huge difference. Everything is now at a much more natural height and within easy reach.
The matte black finish looks great and the two-sided design makes the cockpit look much more complete. Very happy with how everything turned out.
The two-arm long version: left and right aluminium profile supports with two mounting plates, for a cockpit that has no side supports of its own. It sits with the flight simulator controls we stock.
This is the kit to buy if you are starting from a bare extrusion frame and want a joystick on one side and a throttle on the other, both sitting wide enough to match the aircraft.
If your rig is a TR160, it already includes one support arm, so the single-arm version is the one you want instead.
A HOTAS layout needs two mounting points, and most aluminium cockpits ship without either. This kit supplies both arms and both plates, so a stick goes on one side and a throttle on the other in a single purchase.
The alternative, buying a single-arm kit and adding a second arm later, ends up costing more and arriving in two deliveries. If your frame has no side supports, start here.
Trak Racer's own note is clear: if you are installing onto a TR160, take the single-support version instead, because the TR160 already ships with one support arm. Buying this kit for a TR160 leaves you with a spare arm you paid for.
For every other extrusion cockpit, including the TR80, TR120, TR80-LITE and other branded rigs on 8mm T-slot, this is the complete solution. Compare the short-arm versions in the hardware mounts if your controls sit closer in.
"The right buy for a bare extrusion frame. Two arms, two plates, one order, and the long profile supports give a full HOTAS the width it wants."
"Do not buy this for a TR160. That frame already includes one support arm, so you would be paying for one you do not need. Trak Racer says so on their own page and they are right."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
The two mounting plates take joysticks, throttles and quadrants from Thrustmaster across the HOTAS Warthog, T.Flight HOTAS One and 4, T.16000M and FCS, the TCA Quadrant, Officer and Sidestick Airbus editions and the TWCS throttle; Logitech and Saitek including the X52, X52 Professional and X56; Honeycomb Alpha and Bravo; Virpil, VKB, Winwing, VirtualFly and Hori. The Honeycomb Bravo attaches using a clamp.
Any aluminium profile cockpit with an 8mm T-slot, including Trak Racer's own extrusion frames and other branded rigs built from the same profile.
Buy this one if your cockpit has no side supports. Buy the single-arm version if you are on a TR160, which already includes one support arm.
Yes. Two flight sim mounting plates come with every kit, along with all the brackets and hardware needed to fit it. The controls themselves are separate, and the flight simulator controls covers those.
Type: Flight sim control mount kit, two side supports
Support arms included: 2, left and right
Profile size: 80x40mm
Mounting plates: 2, for joystick and throttle
Finish: Matte black paint
Fitment: Any aluminium profile with an 8mm T-slot
Not recommended for: TR160, which already includes one support arm
Flight controls: Not included
Warranty: 5 years
2x Aluminium profile support arms, left and right
2x Flight sim mounting plates
All brackets and mounting hardware
This Trak Racer flight sim control mount is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Authorised Australian dealer
Gamer Gear Direct is an authorised Australian dealer for the brands we represent, including Trak Racer, Playseat, MOZA Racing, Logitech, Honeycomb Aeronautical, Thrustmaster, HORI, Turtle Beach, Sparco, OMP, PXN, Sigma Integrale and Pokornyi Engineering. We are trusted by over 20,000 customers nationwide.
Every product we sell is 100% genuine, sourced through approved channels, and supported locally.
Fast local shipping
We ship directly from our Australian warehouses, with most orders leaving within 1 to 2 business days. This means faster delivery times and reliable tracking from dispatch to your door.
Hassle-free 100-day returns
Changed your mind? Eligible items can be returned within 100 days provided they are unused, unopened, and in original packaging. We keep the process clear and straightforward.
Genuine Australian warranty
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law. You will not be left dealing with overseas support channels.
Expert support you can trust
Whether you need product advice, compatibility guidance, or after-sales support, you are dealing with people who know the sim and gaming gear we sell inside and out. Our sim and gaming specialists are here to make things easy.
With Gamer Gear Direct you will get:
We also have a Melbourne showroom in Dandenong South, so you can try the gear before you commit. Call us on (03) 9961 0240, talk to our team on live chat, or email support@gamergeardirect.com.au and one of our specialists will help you.
Trusted by professionals
The brands we stock are used at the highest level of motorsport and aviation simulation. The same technologies are used for training, preparation and skill development at professional level, giving you access to pro-grade equipment built for accuracy, realism and reliability.