The FS3 wheel stand is compact by design, which leaves nowhere obvious to put speakers. This three-piece kit mounts them to the stand itself, in front of the driver, so the audio arrives from where the action is rather than from a desk somewhere behind you. It sits with the other hardware mounts we carry.
The mounts are laser-cut steel, lightweight and painted matte black to match the frame.
They fit all FS3 wheel stands and other aluminium profile rigs, and take any speaker with a wall-mount fitting on the back.
On a compact wheel stand the speakers usually end up wherever there is desk space, which is typically behind or beside the driver. That puts the engine note and the road noise in the wrong place relative to the screen, and the brain notices even when you do not consciously register it.
Mounting three speakers to the stand itself puts the sound in front, aligned with the view. It is a small change with an outsized effect on how convincing a compact setup feels, and it costs less than almost anything else you could do to the rig.
One thing Trak Racer is upfront about and worth repeating: mounting this kit to an aluminium profile rig needs 6mm T-nuts, and those are not supplied. On an FS3 wheel stand that does not apply, but on a profile rig you will need them. Ask us and we will make sure you have the right fasteners in the same order.
The speakers themselves need a wall-mount fitting on the back to attach. If yours have no mounting point, the larger 5-speaker kit for aluminium rigs is a better starting point since it ships with its own T-nuts and screws. Both are in the racing simulator accessories.
"For an FS3 owner this is an easy yes. Getting the speakers off the desk and onto the stand, in front of the driver, is the cheapest meaningful upgrade available to a compact rig."
"Two things to check. The 6mm T-nuts needed for an aluminium profile rig are not in the box, so factor those in if you are not fitting it to an FS3. And your speakers need a wall-mount fitting on the back, which not every compact satellite has."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
All FS3 wheel stands, plus other aluminium profile rigs. Note that fitting to a profile rig needs 6mm T-nuts, which Trak Racer does not supply with this kit.
No. This is the mounting hardware only, and your speakers need a wall-mount fitting on the back in order to attach.
The 6mm T-nuts required for mounting to aluminium sim rigs are not supplied. Assembly instructions are included. Ask us and we will make sure the right fasteners go out with your order.
The 5-speaker kit for aluminium rigs mounts five speakers instead of three, includes its own T-nuts and screws, and is built for extruded aluminium cockpits rather than the FS3. It is listed in the hardware mounts.
Type: Speaker mount kit
Speaker capacity: 3
Material: Laser-cut steel
Finish: Matte black paint
Fitment: All FS3 wheel stands and other aluminium profile rigs
Speaker requirement: Speakers with a wall-mount fitting
T-nuts: 6mm T-nuts required for aluminium rigs, not supplied
Speakers: Not included
Warranty: 5 years
3x Trak Racer speaker mounts
Assembly instructions
This Trak Racer speaker mount kit is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.
The FS3 wheel stand is compact by design, which leaves nowhere obvious to put speakers. This three-piece kit mounts them to the stand itself, in front of the driver, so the audio arrives from where the action is rather than from a desk somewhere behind you. It sits with the other hardware mounts we carry.
The mounts are laser-cut steel, lightweight and painted matte black to match the frame.
They fit all FS3 wheel stands and other aluminium profile rigs, and take any speaker with a wall-mount fitting on the back.
On a compact wheel stand the speakers usually end up wherever there is desk space, which is typically behind or beside the driver. That puts the engine note and the road noise in the wrong place relative to the screen, and the brain notices even when you do not consciously register it.
Mounting three speakers to the stand itself puts the sound in front, aligned with the view. It is a small change with an outsized effect on how convincing a compact setup feels, and it costs less than almost anything else you could do to the rig.
One thing Trak Racer is upfront about and worth repeating: mounting this kit to an aluminium profile rig needs 6mm T-nuts, and those are not supplied. On an FS3 wheel stand that does not apply, but on a profile rig you will need them. Ask us and we will make sure you have the right fasteners in the same order.
The speakers themselves need a wall-mount fitting on the back to attach. If yours have no mounting point, the larger 5-speaker kit for aluminium rigs is a better starting point since it ships with its own T-nuts and screws. Both are in the racing simulator accessories.
"For an FS3 owner this is an easy yes. Getting the speakers off the desk and onto the stand, in front of the driver, is the cheapest meaningful upgrade available to a compact rig."
"Two things to check. The 6mm T-nuts needed for an aluminium profile rig are not in the box, so factor those in if you are not fitting it to an FS3. And your speakers need a wall-mount fitting on the back, which not every compact satellite has."
- Blake Sterling, Founder & CEO, Gamer Gear Direct
All FS3 wheel stands, plus other aluminium profile rigs. Note that fitting to a profile rig needs 6mm T-nuts, which Trak Racer does not supply with this kit.
No. This is the mounting hardware only, and your speakers need a wall-mount fitting on the back in order to attach.
The 6mm T-nuts required for mounting to aluminium sim rigs are not supplied. Assembly instructions are included. Ask us and we will make sure the right fasteners go out with your order.
The 5-speaker kit for aluminium rigs mounts five speakers instead of three, includes its own T-nuts and screws, and is built for extruded aluminium cockpits rather than the FS3. It is listed in the hardware mounts.
Type: Speaker mount kit
Speaker capacity: 3
Material: Laser-cut steel
Finish: Matte black paint
Fitment: All FS3 wheel stands and other aluminium profile rigs
Speaker requirement: Speakers with a wall-mount fitting
T-nuts: 6mm T-nuts required for aluminium rigs, not supplied
Speakers: Not included
Warranty: 5 years
3x Trak Racer speaker mounts
Assembly instructions
This Trak Racer speaker mount kit is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.
Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.
All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.
Estimated delivery times after dispatch:
Click here to view our full shipping & handling policy
Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!
All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.
Click here to view our full returns policy.
Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.
This means every product is 100% genuine, sourced through approved channels, and supported locally.
We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.
This ensures faster delivery times and reliable tracking from dispatch to your door.
Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.
Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.
You won't be left dealing with overseas support channels.
Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.
Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:
Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.
The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.
The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.
