MOZA HMA150 Motion System Pre-Orders Open
MOZA HMA150 Motion System Pre-Orders Open
Skip to content

Trak Racer Freestanding Quad Monitor Stand With Extra Leg Supports

$819.00

Availability: Translation missing: en.general.icons.icon_check_circle icon 79 in stock, ready to be shipped

✔️ Authorised Australian Dealer
✔️ Fast Shipping Australia-Wide
✔️ 100 Day FREE Returns
✔️ Backed By Manufacturer Warranty
✔️ Experts Ready To Help: (03) 9961 0240

Estimated Arrival: Between Sep 01 and Sep 03. *ETA approximate ONLY

Secured and trusted checkout with

Notify me when back in stock

Description

Trak Racer Freestanding Quad Monitor Stand With Extra Leg Supports

This is the version built for screens that are genuinely large. Three front panels up to 55 inches each, an overhead display up to 45, and a stated load capacity of 170kg carried on 80x40mm aluminium profile with additional support legs. It is the most specified stand in Trak Racer's monitor range and it sits with the rest of the sim racing monitor stands we stock.

The extra legs exist for one reason: outer screens at 55 inches are heavy and a long way from the centre of the frame. Without additional support that leverage shows up as sag and misalignment over time, which is exactly the failure a quad setup cannot tolerate.

Side monitors swivel up to 90 degrees, and height, leg width and forward or back positioning all adjust.

Trak Racer freestanding quad monitor stand with extra leg supports shown complete

Key features

  • Three front displays up to 55 inches each
  • Overhead display up to 45 inches
  • Load capacity of up to 170kg
  • 80x40mm aluminium profile construction
  • Additional support legs to prevent sag
  • Up to 90 degrees of swivel on the side monitors
  • Height, leg width and forward or back adjustment
  • Freestanding, so no vibration transfer from the rig

The extra legs are the entire point

A 55 inch panel hung at the outer edge of a quad array puts a lot of weight a long way from the frame's centre. That is a leverage problem rather than a strength problem, and it does not announce itself on day one. It shows up months later as screens that have drifted out of alignment and will not stay where you set them.

The additional support legs put a load path under the outer panels rather than relying on the crossbeam to cantilever them. Combined with the 80x40mm profile and the 170kg capacity, this is the stand specified to actually carry what it claims.

Trak Racer quad monitor stand showing the additional support legs

Numbers you can plan around

Most stands in this range publish very little. This one gives you three front positions at up to 55 inches, an overhead position at up to 45, 80x40mm profile, a 170kg load capacity and up to 90 degrees of swivel on the side monitors. That is enough to plan a build around rather than guess at.

Ninety degrees of swivel is more than any sim racing setup needs for wrap-around geometry, which means the adjustment range is comfortably beyond the working range rather than being used at its limits. Have a look at the aluminium chassis rigs if you are matching this to a cockpit.

Trak Racer quad monitor stand with extra leg supports viewed from the side

VESA and what is not included

One thing worth knowing before ordering: a set of three VESA adjustment brackets is available separately, which widens the range of mounting patterns the stand will take. If your panels use an unusual pattern, ask us to confirm fitment before you order.

It fits alongside Trak Racer tube frames including the FS3, RS6, TR8 PRO, TRX, Porsche 91XTR, Carbon Fibre TRX, TR5, TRF, Aston Martin AMR26, TR2, TR3, TR4 and the Hot Wheels HW2, HW3 and HW5 and extrusion frames including the TR200, TRA, TR160, TR120, TR80S, TR40S and TRK, though as a freestanding stand it is not bolted to any of them and works with most other cockpits too.

Trak Racer quad monitor stand with extra leg supports shown from the rear

Our expert take

"This is the quad stand we would recommend to anyone running 55 inch panels or a motion rig with four screens. It is the only one in the range that publishes a load rating, and 170kg on 80x40mm profile with extra legs is a real specification rather than a marketing line."

"Two caveats. VESA adjustment brackets are a separate purchase on this one, so check your mounting pattern before ordering. And a stand carrying three 55 inch screens needs serious floor space behind the rig, so measure the room before you commit to it."

- Blake Sterling, Founder & CEO, Gamer Gear Direct


Frequently asked questions

How much weight will it carry?

Trak Racer states a load capacity of up to 170kg, which is the highest published figure in their monitor stand range and the reason this model exists.

What size screens does it take?

Three front displays up to 55 inches each, plus an overhead display up to 45 inches.

What do the extra leg supports do?

They put a load path under the outer screens rather than cantilevering them from the centre of the frame. That is what prevents sag and misalignment over time with 45 to 55 inch panels.

Are VESA brackets included?

A set of three VESA adjustment brackets is available separately for panels that need it. Ask us to confirm fitment for your panels before ordering, and see the sim racing monitor stands for the bracket options.

Specifications

Type: Freestanding quad monitor stand with extra leg supports
Display capacity: 4
Front displays: 3, up to 55 inches each
Overhead display: Up to 45 inches
Load capacity: Up to 170kg
Construction: 80x40mm aluminium profile with additional support legs
Side monitor swivel: Up to 90 degrees
Adjustment: Height, leg width and forward or back positioning
VESA adjustment brackets: Available separately
Compatible tube frames: FS3, RS6, TR8 PRO, TRX, Porsche 91XTR, Carbon Fibre TRX, TR5, TRF, Aston Martin AMR26, TR2, TR3, TR4 and the Hot Wheels HW2, HW3 and HW5
Compatible extrusion frames: TR200, TRA, TR160, TR120, TR80S, TR40S and TRK
Monitors: Not included
Warranty: 5 years

What's In The Box?

1x Trak Racer freestanding quad monitor stand with extra leg supports
Additional support legs
Mounting hardware

Warranty

This Trak Racer monitor stand is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.

Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.

All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.

Shipping

Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.

Estimated delivery times after dispatch:

  • VIC: 2–4 business days
  • NSW: 2–4 business days
  • ACT: 3–5 business days
  • QLD: 2–4 business days
  • SA: 2–4 business days
  • WA: 4–10 business days
  • NT: 4–10 business days
  • TAS: 4–10 business days

Click here to view our full shipping & handling policy

100 Day FREE Returns

Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!

All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.

Click here to view our full returns policy.

Why Buy From Us?

Authorised Australian dealer

Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.

This means every product is 100% genuine, sourced through approved channels, and supported locally.

Fast local shipping

We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.

This ensures faster delivery times and reliable tracking from dispatch to your door.

Hassle-free 30-day returns

Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.

Genuine Australian warranty

Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.

You won't be left dealing with overseas support channels.

Expert support you can trust

Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.

Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:

  • Expert guidance on choosing the right gaming gear for your goals and budget
  • Personalised setup advice tailored to your space and gaming needs
  • Smart gear pairing suggestions for PCs, consoles, monitors, keyboards, controllers and accessories
  • Dedicated account representative for ongoing support

Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.

Trusted by professionals

The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.

The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.

Description

Trak Racer Freestanding Quad Monitor Stand With Extra Leg Supports

This is the version built for screens that are genuinely large. Three front panels up to 55 inches each, an overhead display up to 45, and a stated load capacity of 170kg carried on 80x40mm aluminium profile with additional support legs. It is the most specified stand in Trak Racer's monitor range and it sits with the rest of the sim racing monitor stands we stock.

The extra legs exist for one reason: outer screens at 55 inches are heavy and a long way from the centre of the frame. Without additional support that leverage shows up as sag and misalignment over time, which is exactly the failure a quad setup cannot tolerate.

Side monitors swivel up to 90 degrees, and height, leg width and forward or back positioning all adjust.

Trak Racer freestanding quad monitor stand with extra leg supports shown complete

Key features

  • Three front displays up to 55 inches each
  • Overhead display up to 45 inches
  • Load capacity of up to 170kg
  • 80x40mm aluminium profile construction
  • Additional support legs to prevent sag
  • Up to 90 degrees of swivel on the side monitors
  • Height, leg width and forward or back adjustment
  • Freestanding, so no vibration transfer from the rig

The extra legs are the entire point

A 55 inch panel hung at the outer edge of a quad array puts a lot of weight a long way from the frame's centre. That is a leverage problem rather than a strength problem, and it does not announce itself on day one. It shows up months later as screens that have drifted out of alignment and will not stay where you set them.

The additional support legs put a load path under the outer panels rather than relying on the crossbeam to cantilever them. Combined with the 80x40mm profile and the 170kg capacity, this is the stand specified to actually carry what it claims.

Trak Racer quad monitor stand showing the additional support legs

Numbers you can plan around

Most stands in this range publish very little. This one gives you three front positions at up to 55 inches, an overhead position at up to 45, 80x40mm profile, a 170kg load capacity and up to 90 degrees of swivel on the side monitors. That is enough to plan a build around rather than guess at.

Ninety degrees of swivel is more than any sim racing setup needs for wrap-around geometry, which means the adjustment range is comfortably beyond the working range rather than being used at its limits. Have a look at the aluminium chassis rigs if you are matching this to a cockpit.

Trak Racer quad monitor stand with extra leg supports viewed from the side

VESA and what is not included

One thing worth knowing before ordering: a set of three VESA adjustment brackets is available separately, which widens the range of mounting patterns the stand will take. If your panels use an unusual pattern, ask us to confirm fitment before you order.

It fits alongside Trak Racer tube frames including the FS3, RS6, TR8 PRO, TRX, Porsche 91XTR, Carbon Fibre TRX, TR5, TRF, Aston Martin AMR26, TR2, TR3, TR4 and the Hot Wheels HW2, HW3 and HW5 and extrusion frames including the TR200, TRA, TR160, TR120, TR80S, TR40S and TRK, though as a freestanding stand it is not bolted to any of them and works with most other cockpits too.

Trak Racer quad monitor stand with extra leg supports shown from the rear

Our expert take

"This is the quad stand we would recommend to anyone running 55 inch panels or a motion rig with four screens. It is the only one in the range that publishes a load rating, and 170kg on 80x40mm profile with extra legs is a real specification rather than a marketing line."

"Two caveats. VESA adjustment brackets are a separate purchase on this one, so check your mounting pattern before ordering. And a stand carrying three 55 inch screens needs serious floor space behind the rig, so measure the room before you commit to it."

- Blake Sterling, Founder & CEO, Gamer Gear Direct


Frequently asked questions

How much weight will it carry?

Trak Racer states a load capacity of up to 170kg, which is the highest published figure in their monitor stand range and the reason this model exists.

What size screens does it take?

Three front displays up to 55 inches each, plus an overhead display up to 45 inches.

What do the extra leg supports do?

They put a load path under the outer screens rather than cantilevering them from the centre of the frame. That is what prevents sag and misalignment over time with 45 to 55 inch panels.

Are VESA brackets included?

A set of three VESA adjustment brackets is available separately for panels that need it. Ask us to confirm fitment for your panels before ordering, and see the sim racing monitor stands for the bracket options.

Specifications

Type: Freestanding quad monitor stand with extra leg supports
Display capacity: 4
Front displays: 3, up to 55 inches each
Overhead display: Up to 45 inches
Load capacity: Up to 170kg
Construction: 80x40mm aluminium profile with additional support legs
Side monitor swivel: Up to 90 degrees
Adjustment: Height, leg width and forward or back positioning
VESA adjustment brackets: Available separately
Compatible tube frames: FS3, RS6, TR8 PRO, TRX, Porsche 91XTR, Carbon Fibre TRX, TR5, TRF, Aston Martin AMR26, TR2, TR3, TR4 and the Hot Wheels HW2, HW3 and HW5
Compatible extrusion frames: TR200, TRA, TR160, TR120, TR80S, TR40S and TRK
Monitors: Not included
Warranty: 5 years

What's In The Box?

1x Trak Racer freestanding quad monitor stand with extra leg supports
Additional support legs
Mounting hardware

Warranty

This Trak Racer monitor stand is backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use.

Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced directly from Trak Racer's official distributors, and our Australian simulation team is only a call or email away.

All Trak Racer products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.

Shipping

Orders are typically processed within 1–2 business days and shipped via trusted Australian courier partners.

Estimated delivery times after dispatch:

  • VIC: 2–4 business days
  • NSW: 2–4 business days
  • ACT: 3–5 business days
  • QLD: 2–4 business days
  • SA: 2–4 business days
  • WA: 4–10 business days
  • NT: 4–10 business days
  • TAS: 4–10 business days

Click here to view our full shipping & handling policy

100 Day FREE Returns

Changed your mind? No problem! You can return unused, unopened items within 100 days of your order date, provided they’re in original packaging and resaleable condition. Better still, we'll cover the return shipping!

All Gamer Gear Direct products are backed by Australian Consumer Law and include a minimum 12-month Australian warranty. If there’s an issue with your product, our team is here to help and will work to make it right.

Click here to view our full returns policy.

Why Buy From Us?

Authorised Australian dealer

Gamer Gear Direct is an authorised Australian dealer for every brand we sell and is trusted by over 20,000 customers nationwide.

This means every product is 100% genuine, sourced through approved channels, and supported locally.

Fast local shipping

We ship directly from Australian warehouses, with most orders leaving within 1–2 business days.

This ensures faster delivery times and reliable tracking from dispatch to your door.

Hassle-free 30-day returns

Changed your mind? Eligible items can be returned within 30 days provided they’re unused, unopened, and in original packaging. We keep the process clear and straightforward.

Genuine Australian warranty

Every product we sell is covered by a comprehensive Australian warranty, backed by both the manufacturer and Australian Consumer Law.

You won't be left dealing with overseas support channels.

Expert support you can trust

Whether you need product advice, compatibility guidance, or after-sales support, you’re dealing with people who know the sim and gaming gear we sell inside and out.

Our sim & gaming specialists are here to make things easy. With Gamer Gear Direct you’ll get:

  • Expert guidance on choosing the right gaming gear for your goals and budget
  • Personalised setup advice tailored to your space and gaming needs
  • Smart gear pairing suggestions for PCs, consoles, monitors, keyboards, controllers and accessories
  • Dedicated account representative for ongoing support

Call us on (03) 9961 0240, talk to our gaming experts on live chat or email us: support@gamergeardirect.com.au and one of our knowledgeable experts will help you.

Trusted by professionals

The brands we stock are trusted at the highest level of performance across motorsport, golf, and aviation. This includes elite professionals such as Oscar Piastri, Lando Norris, Max Verstappen, and Bryson DeChambeau.

The same simulation technologies are used for training, preparation, and skill development at the top level — giving you access to pro-grade equipment built for accuracy, realism, and reliability.